Abstract:Highly stable catalytic activity of metallic Ti and corresponding mechanistic understanding are of particularly critical importance for the development of sodium alanate (NaAlH4) as an advanced on-board hydrogen storage medium. However, only limited catalytic effectiveness is observed for commercial metallic Ti powders due to their ductile behavior limiting the dispersion of large particles. Here, we successfully synthesize ultrafine metallic Ti nanoparticles (3-5 nm) supported on amorphous carbon (nano-Ti@C) through a facile, scalable calcination process. Unlike commercial metallic Ti powders, the nano-Ti@C exhibits remarkable catalytic activity for hydrogen storage in NaAlH4, superior to other reported transition metals and rare earth metals. The 7 wt% nano-Ti@C-containing NaAlH4 sample delivers a quite low onset temperature of dehydrogenation of 75 degrees C and a practically available hydrogen capacity as high as 5.04 wt%. Reloading of hydrogen is fully completed in <3 min at 100 degrees C and 120 bar H-2; this sorption kinetics is fastest among all catalytically enhanced NaAlH4 systems known. Moreover, only 0.07 wt% of hydrogen capacity is lost after 100 cycles, exhibiting a highly stable cyclability. Theoretical calculations reveal the interaction between Ti and Al, which not only weakens the Al-H bonding but also facilitates diffusion of H in NaAlH4, contributing to the superior catalytic activity of nano-Ti@C. Our findings greatly increase potentials towards practical applications of catalyst-doped NaAlH4 for onboard hydrogen storage.

Fabrication and Properties of Ultrafine Ti Powder by NaCl Coated/hydrogenation-Dehydrogenation Combined Method

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

The Thermal Analysis, Crystal Growth And Structure Transformation Of Nano-Scale Tio2 Prepared By Ticl4 Hydrolysis

A study on the synthesis of coarse TiO2 powder with controlled particle sizes and morphology via hydrolysis

Passivation coating on titanium powder surface via SnCl4-Ti gas–solid fluidization reaction

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

Phase Transformation, Microstructural Evolution and Tensile Properties of a TiH2-Based Powder Metallurgy Pure Titanium

Achieving synergy of strength and ductility in powder metallurgy commercially pure titanium by a unique oxygen scavenger

Single- and Mixed-Phase TiO2 Powders Prepared by Excess-Hydrolysis of a Titanium Alkoxide

Investigating phase transformation, densification and diffusion mechanism of TiH 2 powder to achieve a high ductile Ti6Al4V alloy

Synthesis of TiCl2 powders through reactive gas phase infiltration in a fluidized bed reactor

Triggering highly stable catalytic activity of metallic titanium for hydrogen storage in NaAlH4 by preparing ultrafine nanoparticles

Highly Photocatalytic TiO 2 Interconnected Porous Powder Fabricated by Sponge-Templated Atomic Layer Deposition

Preparation of Titanium dioxide Nano powder and deposits the powder on Titanium slides

A hydrothermal method produce titanate powders

Deoxidation thermodynamics of Ti–O in hydrogen atmosphere: Preparation of TiH2 alloy powder by direct reduction of spent V2O5–WO3/TiO2 catalyst with magnesiothermic

Deposition Mechanisms and Oxidation Behaviors of Ti-Ni Coatings Deposited in Low-Temperature HVOF Spraying Process

Controlled synthesis of nano-sized TiO_2 powders using high-temperature vapor phase process

Corrosion of Ti Coating Prepared by Modified HVOF Process

Corrosion behavior of Ti powder enhanced potassium silicate coating with solid NaCl deposit in wet oxygen at 500 °C

Fabrication of Superhydrophobic Surfaces of Titanium Dioxide and Nickel Through Electrochemical Deposition on Stainless Steel Substrate