Abstract:Nanoparticles have become important in many applications. It is essential to be able to control the particle size because the properties of nanoparticles change dramatically with particle size. An efficient way to generate nanoparticles is via aerosol processes. In this study we used Liquid Flame Spray consisting of liquid precursor droplets sprayed into a high-speed hydrogen/oxygen flame where they evaporate, vapours react and nucleate to form titania nanoparticles. Using flame methods, also dopants and sensitizers can easily be introduced in order to, e.g. improve the photocatalytic activity of the nanomaterial. To obtain a practical guideline in order to tailor the final nanoparticle size in the process, we have systematically studied the effects of different process parameters on the particle size of titania. Titania is used, e.g. as a photocatalyst, and then both particle size and crystal structure are important when looking at the efficiency. In this work, the generated nanoparticle size has been measured by aerosol instrumentation and the particle morphology has been verified with transmission electron microscopy. In Liquid Flame Spray method, there are several adjustable parameters such as precursor feed rate into the flame; concentration of the precursor; precursor material itself as well as solvent used in the precursor; mass flow of combustion gases and also the mechanical design of the torch used. We used metal organic based titanium precursors in alcohol solvents, predominantly ethanol and 2-propanol. Large differences in particle production between the precursors were found. Differences could also be seen for various solvents. As for precursor feed in the flame, the more mass is introduced the larger the nanoparticles are, i.e. precursor concentration and precursor feed rate have an impact on particle size. A similar phenomenon can be discovered for the combustion gas flow rates. Torch design also plays an important role in controlling the particle size.

Controlled synthesis of nano-sized TiO_2 powders using high-temperature vapor phase process

Effect of Precursor Loading on Non-Spherical TiO2 Nanoparticle Synthesis in a Diffusion Flame Reactor

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Numerical Simulation of Nanoparticle Synthesis in Diffusion Flame Reactor

Direct Synthesis of Nanostructured Tio2 Films with Controlled Morphologies by Stagnation Swirl Flames

SYNTHESIS OF TIO_2 NANO-PARTICLES IN LOW-SWIRL TURBULENT PREMIXED FLAMES

Synthesis of Nanoparticles in a Flame Aerosol Reactor with Independent and Strict Control of Their Size, Crystal Phase and Morphology

Synthesis of TiO2 nanoparticles by premixed stagnation swirl flames

Synthesis of nano-sized TiC powders by designing chemical vapor deposition system in a fluidized bed reactor

Synthesis of TiCl2 powders through reactive gas phase infiltration in a fluidized bed reactor

Direct Continuous Hydrothermal Synthesis of High Surface Area Nanosized Titania

A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

Cluster Formation Mechanisms of Titanium Dioxide During Combustion Synthesis: Observation with an APi-TOF

Fluid dynamics and particle trajectories in a diffusion flame reactor to synthesize TiO2 nanoparticles

The effect of process parameters on the Liquid Flame Spray generated titania nanoparticles

Controlled Synthesis of Titanium Dioxide Nanostructures

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Plasma Synthesis and Combustion Characteristics of Nano-Sized Metal Particles

Synthesis of TiO2 Nanoparticles from Ilmenite Through the Mechanism of Vapor-Phase Reaction Process by Thermal Plasma Technology

Synthesis of titanium-oxide nanoparticles with size and stoichiometry control

One-step synthesis of noble metal–titanium dioxide nanocomposites in a flame aerosol reactor