Abstract:Fe‐TiC metal matrix composite powder is manufactured applying vacuum inert gas atomization technique. The TiC reinforcement phase forms in‐situ within spraying of the Fe‐based molten metal preliminary alloyed with 1 wt.% [C] and 4 wt.% [Ti]. Alloying strategy, homogenization time, and spraying temperature are varied for three conducted atomization experiments in this study. Medium particle size (d50) lies in a range of 41‐55 µm for obtained spherical powders. Herewith, fabricated powders demonstrate chemical composition stability with minor fluctuations related to atomization parameters. SEM analysis and EDX mapping of powder cross‐section samples reveal well‐dispersed submicron TiC precipitates of two different morphologies – primary‐blocky and eutectic‐plate‐shape carbides. The amount of precipitates and their morphology depend on the particle size. Namely, coarser powder particles tend to have more primary carbides that are presumably formed already in liquid droplets. Meanwhile, TiC precipitation in finer particles up to approx. 25 µm is completely suppressed due to an extremely high cooling rate. Difficulties of the Fe‐Ti‐C melt atomization (e.g., formation of a semi‐liquid slag layer, loss of TiC forming elements, presence of large precipitates in a powder) are discussed considering the thermodynamic analysis of this system and Fe‐TiC remelting experiments conducted on a hot stage microscope.Fe‐TiC metal matrixcomposite powder was produced in this study by vacuum inert gas atomization. TiC reinforcement was formed in‐situ within a technological process. Depending on a particle size, fabricated powder particles contain up to 7 vol.% of well‐dispersed, submicron precipitates. Resulting powder can be further utilized in additive manufacturing techniques owing to its sphericity and appropriate powder size distribution.This article is protected by copyright. All rights reserved.

Synthesis of TiCl2 powders through reactive gas phase infiltration in a fluidized bed reactor

Synthesis of nano-sized TiC powders by designing chemical vapor deposition system in a fluidized bed reactor

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Controlled synthesis of nano-sized TiO_2 powders using high-temperature vapor phase process

Passivation coating on titanium powder surface via SnCl4-Ti gas–solid fluidization reaction

Facile synthesis of fine Ti–Al intermetallic compound powders via sodiothermic reduction in molten CaCl2

Chlorination of Synthetic Rutile with Carbon Tetrachloride at Low Temperature for Producing Titanium Tetrachloride

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

The synthesis of nanosized TiO2 powder using a sol-gel method with TiCl4 as a precursor

Titanium powder production by TiCl4 gas injection into magnesium through molten salts

A study on the synthesis of coarse TiO2 powder with controlled particle sizes and morphology via hydrolysis

The Preparation of Nanosized Anatase TiO2 Powder by Using TiCl4 a Precursor

A novel simple method to stably synthesize Ti3AlC2 powder with high purity

Manufacturing Fe–TiC Composite Powder via Inert Gas Atomization by Forming Reinforcement Phase In Situ

Synthesis of Ti powders with different morphologies via controlling the valence state of the titanium ion in KCl-NaCl molten salt

Titanium powder production by preform reduction process (PRP)

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals

Production of Titanium Dioxide Directly from Titanium Ore through Selective Chlorination Using Titanium Tetrachloride

A novel process for preparation of titanium dioxide from Ti-bearing electric furnace slag: NH4HF2-HF leaching and hydrolyzing process

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Large-scale fabrication of Ti3AlC2 powder with high-purity