Abstract:As a new element of flame, tubular flame especially the swirl type has excellent flame characteristics such as negligible heat loss, aerodynamic stability and thermodynamic stability. The premixed swirl type tubular flame has been extensively studied through a variety of burners, and various applications have been proposed and demonstrated for determining the flammability limits, stabilizing a flame in a high speed flow, and obtaining a uniform and large-area laminar flame to heat iron slab or to reduce steel sheet surface. To avoid potential hazards of flame flash back even detonation in premixed mode, an inherently safe technique of rapidly mixed tubular flame combustion has proposed, in which the fuel and the oxidizer are individually and tangentially injected into a cylindrical burner from four rectangular slits. Recently this burner has been successfully adopted to investigate the characteristics of oxygen enhanced combustion of methane, which provides a useful tool to save energy and reduce emissions. The results illustrate that the mixing of fuel and oxidizer plays a vital role in obtaining a stable tubular flame. To fundamentally investigate the flow field especially the mixing process in the rapidly mixed tubular flame burner, a series of measurements have been made on the flow visualization and velocity distribution with a Particle Image Velocimetry (PIV) system. Two groups of optically accessible quartz burners were designed: in the first group, the width of the rectangular slit was maintained as 2 mm while the length varied from 8 to 64 mm, in which the swirl number (Sw) varied from 2.75 to 0.34; in the second group, the slit width increased from 1 to 3 through 2 mm while maintaining the slit length as 8 mm, in which the swirl number decreased from 5.89 to 1.70 through 2.75. The total flow rate and the mean injection velocity ratio of fuel inlet to oxidizer inlet were also varied to measure the mixing layer thickness through flow visualization in a cross section perpendicular to the tube axis around the center of the burner. Detailed observation shows that the mixing layer thickness around the inlet is dominated by a boundary layer type flow regardless of swirl number and injection velocity ratio. The coefficients for the thickness estimation based on the square root of injection velocity (in reverse relationship) have been summarized. In addition, for a constant total flow rate, the mixing is fastest when the mean injection velocity of each inlet is the same. The flow visualization and the axial velocity distribution in a plane containing the tube axis were also analyzed to illustrate the flow motion downstream of the injection slits. The results demonstrate that a reverse flow appears in the burners of swirl number larger than 0.60.

SYNTHESIS OF TIO_2 NANO-PARTICLES IN LOW-SWIRL TURBULENT PREMIXED FLAMES

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Synthesis of TiO2 nanoparticles by premixed stagnation swirl flames

Shear Turbulence Controllable Synthesis of Aggregated Nano-Particles Using a Swirling Vortex Flow Reactor Assisted by Ultrasound Irradiation

Direct Synthesis of Nanostructured Tio2 Films with Controlled Morphologies by Stagnation Swirl Flames

Controlled synthesis of nano-sized TiO_2 powders using high-temperature vapor phase process

Numerical Simulation of Nanoparticle Synthesis in Diffusion Flame Reactor

Novel Low-Intensity Phase-Selective Laser-Induced Breakdown Spectroscopy of TiO2 Nanoparticle Aerosols During Flame Synthesis

Effect of Precursor Loading on Non-Spherical TiO2 Nanoparticle Synthesis in a Diffusion Flame Reactor

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Large eddy simulation-bivariate sectional model for non-spherical TiO 2 nanoparticle synthesis in flame

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Synthesis of Nanoparticles in a Flame Aerosol Reactor with Independent and Strict Control of Their Size, Crystal Phase and Morphology

Flamelet LES of a Swirl-Stabilized Multi-Stream Pulverized Coal Burner in Air and Oxy-Fuel Atmospheres with Pollutant Formation

An Experimental Study on the Flow Visualization in Rapidly Mixed Tubular Flame Burners of Various Swirl Numbers

Flame synthesis of nanoparticles based on high flux electrostatic atomization burner

Electric-field-assisted Stagnation-Swirl-flame Synthesis of Porous Nanostructured Titanium-Dioxide Films

Investigation on Ignition Behaviors of Pulverized Coal Particles in a Tubular Swirl Burner

Promoting the low temperature activity of Ti-V-O catalysts by premixed flame synthesis

Turbulence-assisted Shear Controllable Synthesis of Silicon Oxide Micro/Nano Particles using a Counter Axial-Swirling Impinging Jet Flow Reactor

Control of Size and Crystal Form of TiO_2 Nanocrystalline Synthesized by Co-flow Diffusion Flames