Abstract:Liquid atomization is applied in nanostructure dense coating technology to inject suspended nano-size powder materials into a suspension plasma spray (SPS) torch. This paper presents the effects of the atomization parameters on the nanoparticle processing. A numerical model was developed to simulate the dynamic behaviors of the suspension droplets, the solid nanoparticles or agglomerates, as well as the interactions between them and the plasma gas. The plasma gas was calculated as compressible, multi-component, turbulent jet flow in Eulerian scheme. The droplets and the solid particles were calculated as discrete Lagrangian entities, being tracked through the spray process. The motion and thermal histories of the particles were given in this paper and their release and melting status were observed. The key parameters of atomization, including droplet size, injection angle and velocity were also analyzed. The study revealed that the nanoparticle processing in SPS preferred small droplets with better atomization and less aggregation from suspension preparation. The injection angle and velocity influenced the nanoparticle release percentage. Small angle and low initial velocity might have more nanoparticles released. Besides, the melting percentage of nanoparticles and agglomerates were studied, and the critical droplet diameter to ensure solid melting was drawn. Results showed that most released nanoparticles were well melted, but the agglomerates might be totally melted, partially melted, or even not melted at all, mainly depending on the agglomerate size. For better coating quality, the suspension droplet size should be limited to a critical droplet diameter, which was inversely proportional to the cubic root of weight content, for given critical agglomerate diameter of being totally melted.

Plasma Synthesis and Combustion Characteristics of Nano-Sized Metal Particles

Nucleation on Thermal History and Microstructural Evolution of Atomized Ti-48Al Nano and Micro-Powders

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals

Size Resolved High Temperature Oxidation Kinetics of Nano-Sized Titanium and Zirconium Particles.

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Numerical Simulation of Nanoparticle Synthesis in Diffusion Flame Reactor

Flame structures and particle-combustion mechanisms in nano and micron titanium dust explosions

Reactive B/Ti Nano-Multilayers with Superior Performance in Plasma Generation.

Effect of Precursor Loading on Non-Spherical TiO2 Nanoparticle Synthesis in a Diffusion Flame Reactor

Controlled synthesis of nano-sized TiO_2 powders using high-temperature vapor phase process

Preparation of Ni–Ti composite powder using radio frequency plasma spheroidization and its laser powder bed fusion densification

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Synthesis and characterization of Fe–Ti nanoparticles by nitrogen plasma metal reaction

Laser-Based Investigation of the Transition from Droplets to Nanoparticles in Flame-Assisted Spray Synthesis of Functional Nanoparticles

Synthesis of Fe-Al Nanoparticles by Hydrogen Plasma-Metal Reaction

Phases of Titanium Combustion in Air

Spark Ablation Generation of Metal Nanoparticles and Coating on TiO2 in the Aerosol Phase

Effects Investigation of Particle Size and Concentration on the Ignition, Explosion Characteristics, and Behavior of Flame Propagation in TC4 Titanium Alloys

Experimental Study of Combustion Characteristics of Micron and Nano Iron Powders

In-situ Laser Diagnostic of Nanoparticle Formation and Transport Behavior in Flame Aerosol Deposition

Plasma synthesis of titanium nitride, carbide and carbonitride nanoparticles by means of reactive anodic arc evaporation from solid titanium