Abstract:For the fabrication of high-strength carbon nanotube (CNT) reinforced Al matrix composites, the uniform dispersion, strong interface bonding and high structural integrity of CNTs have been regarded as the three most important issues. In this work, two distinct approaches, namely high shear dispersion (HSD) and shift-speed ball milling (SSBM), were applied to disperse CNTs (1.5 wt%) into pure Al powders. These two kinds of CNT/Al composite powders as well as the pure Al powder (as a comparison) were deposited onto stainless steel plates by cold spraying using different processing parameters. The velocity and the temperature of the particle prior to impact was simulated by the commercial code of Fluent. The deposition efficiency, microstructure evolution, as well as the distribution and structural integrity of CNTs in the composite coatings produced from different starting powders were comparatively investigated in terms of X-ray diffraction (XRD), Raman spectra, and electron back scanning diffraction (EBSD). According to the XRD and Raman analysis, no new phases such as oxides or brittle Al4C3 were detectable in both CNT/Al composite coatings. Some structural damages of CNTs were found in both composite coatings, especially the one fabricated from HSD composite powder. The dispersion of CNTs onto Al particle surfaces by HSD approach did not achieve a significant strengthening effect on the composite coatings, but adversely affected the metallic bonding of the particles and the substrate. The microhardness of the CNT/Al composite coating produced from SSBM powders reached around ~115 HV0.1, showing a significant improvement compared to the pure Al coating mainly due to the grain refinement and CNTs strengthening.

The synthesis of CNTs over hydroxyapatite by CVD and the preparation of CNTs/HA in-situ composite

The Synthesis of CNTs over Hydroxyapatite by CVD and the Preparation of CNTs/HA in Situ Composite

Fabrication and properties of carbon nanotubes reinforced Fe/hydroxyapatite composites by in situ chemical vapor deposition

Dispersion of carbon nanotubes in hydroxyapatite powder by in situ chemical vapor deposition

Preparation and characterization of carbon nanotubes/hydroxyapatite composites

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Fabrication and Properties of Carbon Nanotube-Reinforced Hydroxyapatite Composites by a Double in Situ Synthesis Process

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

In-situ Homogeneous Synthesis of Carbon Nanotubes on Aluminum Matrix and Properties of Their Composites

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Carbon nanotube-reinforced mesoporous hydroxyapatite composites with excellent mechanical and biological properties for bone replacement material application.

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Carbon Nanotube-Collagen@hydroxyapatite Composites with Improved Mechanical and Biological Properties Fabricated by a Multi in Situ Synthesis Process.

Influence of Synthesis Process on Preparation and Properties of Ni/CNT Catalyst

Facile synthesis of homogeneously dispersed carbon nanotubes on TC4 alloy powder by in-situ CVD and its growth behavior

Study on C/C composites modified by in-situ vapor-grown carbon nanofibers

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition