Abstract:For the fabrication of high-strength carbon nanotube (CNT) reinforced Al matrix composites, the uniform dispersion, strong interface bonding and high structural integrity of CNTs have been regarded as the three most important issues. In this work, two distinct approaches, namely high shear dispersion (HSD) and shift-speed ball milling (SSBM), were applied to disperse CNTs (1.5 wt%) into pure Al powders. These two kinds of CNT/Al composite powders as well as the pure Al powder (as a comparison) were deposited onto stainless steel plates by cold spraying using different processing parameters. The velocity and the temperature of the particle prior to impact was simulated by the commercial code of Fluent. The deposition efficiency, microstructure evolution, as well as the distribution and structural integrity of CNTs in the composite coatings produced from different starting powders were comparatively investigated in terms of X-ray diffraction (XRD), Raman spectra, and electron back scanning diffraction (EBSD). According to the XRD and Raman analysis, no new phases such as oxides or brittle Al4C3 were detectable in both CNT/Al composite coatings. Some structural damages of CNTs were found in both composite coatings, especially the one fabricated from HSD composite powder. The dispersion of CNTs onto Al particle surfaces by HSD approach did not achieve a significant strengthening effect on the composite coatings, but adversely affected the metallic bonding of the particles and the substrate. The microhardness of the CNT/Al composite coating produced from SSBM powders reached around ~115 HV0.1, showing a significant improvement compared to the pure Al coating mainly due to the grain refinement and CNTs strengthening.

Fabrication and properties of carbon nanotubes reinforced Fe/hydroxyapatite composites by in situ chemical vapor deposition

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Preparation and characterization of carbon nanotubes/hydroxyapatite composites

Study of the Mechanical Property of Magnetite/ Hydroxyapatite/ Chitosan Nano-Composite

Preparation and properties of three-dimensional hydroxyapatite/chitosan nanocomposite rods.

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Preparation of Chitosan Bicomponent Nanofibers Filled with Hydroxyapatite Nanoparticles Via Electrospinning

Design and fabrication of carbon fibers with needle-like nano-HA coating to reinforce granular nano-HA composites

A Powder Metallurgy Route to Fabricate CNT-reinforced Molybdenum-Hafnium-carbon Composites

Effect of carbon nanotube incorporation on the mechanical and physical properties of hydroxyapatite/glass ionomer nanocomposite

Fabrication and mechanical properties of in situ prepared mesocarbon microbead/carbon nanotube composites

Carbon Nanotubes/hydroxyapatite Nanocomposites Fabricated by Spark Plasma Sintering for Bonegraft Applications

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Carbon Nanotube Reinforced Hydroxyapatite Nanocomposites As Bone Implants: Nanostructure, Mechanical Strength and Biocompatibility

Effect of iron on the sinterability and properties of HA/Ti-Fe composites

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition

Simultaneous optimization of mechanical and biotribological properties of carbon fibers reinforced hydroxyapatite-polymer composites by constructing networked Si 3 N 4 nanowires

Friction and Wear Behaviors of Reduced Graphene Oxide- and Carbon Nanotube-Reinforced Hydroxyapatite Bioceramics

A Novel Processing Route to Develop Alumina Matrix Nanocompositesreinforced with Multi-Walled Carbon Nanotubes

Fabrication of high-content hybrid-reinforced Al nanocomposites by in-situ reaction of TiO 2 -decorated CNTs and matrix

In situ grown carbon nanotube-Fe3O4-dicalcium phosphate dehydrate composite coating on carbon fibres for bone tissue application