Abstract:Carbon fiber reinforced hydroxyapatite (CF/HA) composites have been considered as a promising candidate for load-bearing bone replacement. However, high-temperature sintering decomposes HA in CF/HA composites, thereby causing oxidation damage in carbon fibers and decreasing the mechanical properties of the composites. In this study, CF/HA composites with excellent mechanical properties and biological activities were fabricated by spark plasma sintering (SPS). The mechanical properties and microstructures of the composites under different sintering temperatures and fiber contents were systematically investigated. Oxidative damage in CF and interfacial problem between fibers and the matrices in the composites were prevented in contrast to that in CF/HA composites prepared through pressureless or hot-pressing sintering. The reinforcing effect of CF was greatly enhanced owing to the absence of oxidative damage. FTIR and XRD results indicates that the HA phases in the composites did not decompose. HA particles size prepared by SPS was smaller than the one prepared by the traditional sintering method. The addition of CF with excellent electrical and thermal conductivities reduced thermal and electrical gradients in the composites during SPS. Accordingly, CF/HA composites with a refined microstructures and improved mechanical properties were obtained. The hardness and bending strength of 0.5 wt% CF-reinforced HA composites (0.5 C F/HA) were 574.0 H V and 110.4 MPa, respectively. The fracture toughness and brittleness index of 0.5 C F/HA were 2.41 MPa m1/2 and 2.59 μm−1/2, respectively. Importantly, the fracture toughness and bending strength of 0.5 C F/HA were can match the properties of compact bones. The in vitro behaviour of the CF/HA composites for cell morphology and proliferation were evaluated using MC3T3-E1. MC3T3-E1 cultured on the composites fabricated SPS showed significantly higher attachment and proliferation rates than those cultured on composites prepared through pressureless sintering. The CF/HA prepared by SPS showed potential as load-bearing bone substitutes owing to their excellent properties.

Carbon Nanotubes/hydroxyapatite Nanocomposites Fabricated by Spark Plasma Sintering for Bonegraft Applications

Carbon Nanotube Reinforced Hydroxyapatite Nanocomposites As Bone Implants: Nanostructure, Mechanical Strength and Biocompatibility

Carbon nanotubes-reinforced polylactic acid/hydroxyapatite porous scaffolds for bone tissue engineering

Carbon fiber reinforced hydroxyapatite composites with excellent mechanical properties and biological activities prepared by spark plasma sintering

Physicochemical, mechanical, dielectric, and biological properties of sintered hydroxyapatite/barium titanate nanocomposites for bone regeneration

Direct 3D Printing of a Tough Hydrogel Incorporated with Carbon Nanotubes for Bone Regeneration.

Carbon nanotubes reinforced with natural/synthetic polymers to mimic the extracellular matrices of bone e a review

Preparation and properties of three-dimensional hydroxyapatite/chitosan nanocomposite rods.

[Biocompatibility of Alpha-Calcium Sulfate Hemihydrate (Csh)/multi-Walled Carbon Nanotube (MWCNT) Composites for Bone Reconstruction Application].

Spark plasma sintered bioceramics – from transparent hydroxyapatite to graphene nanocomposites: a review

3D porous collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite composite scaffolds for bone tissue engineering

Fabrication of Mineralized Polymeric Nanofibrous Composites for Bone Graft Materials

Hydroxyapatite nanoparticles in situ grown on carbon nanotube as a reinforcement for poly (ε-caprolactone) bone scaffold

Fabrication and Characterization of Chitosan/pva with Hydroxyapatite Biocomposite Nanoscaffolds

Design and fabrication of carbon fibers with needle-like nano-HA coating to reinforce granular nano-HA composites

Fabrication and Characterization of Drug-Loaded Nano-Hydroxyapatite/polyamide 66 Scaffolds Modified with Carbon Nanotubes and Silk Fibroin

Enhancing the Strength of Microporous Nanofibrous PVA Mats by Incorporating Nanostructured Hydroxyapatite Synthesized by a Combustion Route for Bone Tissue Regeneration

In vitro and in vivo biocompatibility of multi-walled carbon nanotube/biodegradable polymer nanocomposite for bone defects repair

Hydroxyapatite based biocomposite scaffold: A highly biocompatible material for bone regeneration

Fabrication and biocompatibility of nano non-stoichiometric apatite and poly(epsilon-caprolactone) composite scaffold by using prototyping controlled process

[Research Progress on Application of Carbon Nanotubes in Bone Tissue Engineering Scaffold].