Abstract:The fabrication of bone scaffolds with interconnected porous structure, adequate mechanical properties, excellent biocompatibility and osteoinductivity presents a great challenge. Herein, a hybrid nanostructured hydroxyapatite-chitosan (HA-CS) composite scaffold has been fabricated according to the following steps: (i) the deposition of brushite-CS on a CS fibre porous scaffold by a dip-coating method; and (ii) the formation of a hybrid nanostructured HA-CS composite scaffold by the in situ conversion of brushite to HA using a bioinspired mineralization process. The hybrid HA-CS composite scaffold possesses three-dimensional (3D) interconnected pores with pore sizes of 30-80 μm. The HA rods with a length of ∼200 nm and width of ∼50 nm are perpendicularly oriented to the CS fibres. Interestingly, the abovementioned HA rods are composed of many smaller nanorods with a length of ∼40 nm and width of ∼10 nm oriented along the c-axis. The hybrid nanostructured HA-CS composite scaffold exhibits good mechanical properties with a compression strength of 9.41 ± 1.63 MPa and an elastic modulus of 0.17 ± 0.02 GPa, which are well-matched to those of trabecular bone. The influences of the hybrid HA-CS composite scaffold on cells have been investigated using human bone marrow stem cells (hBMSCs) as cell model and the CS fibre porous scaffold as the control sample. The hybrid HA-CS composite scaffold not only supports the adhesion and proliferation of hBMSCs, but also improves the osteoinductivity. The alkaline phosphatase activity and mineralization deposition on the hybrid HA-CS composite scaffold are higher than those on the CS fibre porous scaffold. Moreover, the hybrid HA-CS composite scaffold can promote the formation of new bone in rat calvarial defects as compared with the CS fibre porous scaffold. The excellent biocompatibility, osteoinductivity and mechanical properties suggest that the hybrid nanostructured HA-CS composite scaffold has great potential for bone tissue engineering.

Carbon nanotube-reinforced mesoporous hydroxyapatite composites with excellent mechanical and biological properties for bone replacement material application.

Fabrication and Properties of Carbon Nanotube-Reinforced Hydroxyapatite Composites by a Double in Situ Synthesis Process

Carbon Nanotube-Collagen@hydroxyapatite Composites with Improved Mechanical and Biological Properties Fabricated by a Multi in Situ Synthesis Process.

Carbon Nanotube Reinforced Hydroxyapatite Nanocomposites As Bone Implants: Nanostructure, Mechanical Strength and Biocompatibility

Preparation and Properties of In-Situ Growth of Carbon Nanotubes Reinforced Hydroxyapatite Coating for Carbon/carbon Composites

In Situ Preparation And Enhanced Mechanical Properties Of Carbon Nanotube/Hydroxyapatite Composites

Carbon nanotubes-reinforced polylactic acid/hydroxyapatite porous scaffolds for bone tissue engineering

Design and Fabrication of Hydroxyapatite-Carbon Nanotubes-Wood Derived Carbon Composites

Carbon Nanotubes/hydroxyapatite Nanocomposites Fabricated by Spark Plasma Sintering for Bonegraft Applications

In Situgrown Carbon Nanotubes on Carbon Fibres and Their Effect on Deposition of Hydroxyapatite Coating

Hydroxyapatite nanoparticles in situ grown on carbon nanotube as a reinforcement for poly (ε-caprolactone) bone scaffold

Polydopamine-Templated Hydroxyapatite Reinforced Polycaprolactone Composite Nanofibers with Enhanced Cytocompatibility and Osteogenesis for Bone Tissue Engineering

Interfacial Design and Construction of Carbon Fiber Composites by Strongly Bound Hydroxyapatite Nanobelt-Carbon Nanotubes for Biological Applications

Hydroxyapatite nanoparticles in situ grown on carbon nanotube as a reinforcement for poly (-caprolactone) bone scaffold

Evaluation of polyetheretherketone composites modified by calcium silicate and carbon nanotubes for bone regeneration: mechanical properties, biomineralization and induction of osteoblasts

Hybrid Nanostructured Hydroxyapatite-Chitosan Composite Scaffold: Bioinspired Fabrication, Mechanical Properties and Biological Properties.

Hydroxyapatite based biocomposite scaffold: A highly biocompatible material for bone regeneration

Mechanically Strong and Bioactive Carbon Fiber-Sic Nanowire-Hydroxyapatite-pyrolytic Carbon Composites for Bone Implant Application

Investigations of gold nanoparticles-mediated carbon nanotube reinforced hydroxyapatite composite for bone regenerations

Mechanical properties and cytocompatibility of carbon fibre reinforced nano-hydroxyapatite/polyamide66 ternary biocomposite.

A Nano-Sandwich Construct Built with Graphene Nanosheets and Carbon Nanotubes Enhances Mechanical Properties of Hydroxyapatite–polyetheretherketone Scaffolds