Abstract:The ever-increasing demand for higher I/O counts on chip requires the finer pitches to improve the performance, cost effectiveness and higher yield. The conventional under bump metallization (UBM) technology may not guarantee the required performance due to higher current density and diffusivity nowadays. In order to overcome these challenges, a UBM with higher strength and resistance to diffusion, better thermal and microstructural properties are required. Recently, nano reinforced Ni-P alloy has been identified as potential approach. Especially, the addition of Carbon nanotube (CNT) was expected to provide strengthening to the resulting UBM layers. CNTs have exceptional and attractive thermal, electrical, and mechanical properties, and are believed to be ideal material for fabricating composites. However, due to the large surface volume ratio, CNTs have strong tendency to agglomerate, which results in clusters. CNT clusters may lead to void formation and further cracking. Therefore, it is of great importance to figure out methods to disperse and incorporate CNTs into Ni-P UBM. In order to disperse carbon nano-tubes in electroless Ni-P coatings, two approaches were employed. Chemical modification, which includes acid oxidation treatment and surfactant treatment were conducted to disperse CNT clusters. Meanwhile, magnetic stirring and ultrasonic agitation were also employed to prepare the CNT/Ni-P composite coatings with CNTs homogeneously embedded. SEM and TEM were used to observe the dispersion after adopting the aforementioned treatment as well as the surface morphology of the deposited layers. It was verified that the dispersion can be significantly improved after proper treatment process, and surface of the CNT/Ni-P was quite smooth; CNTs were equably dispersed throughout the matrix. In addition, the interfacial bonding between CNTs and Ni-P coatings was good and firm. In these cases, an understanding of the effects of the acid oxidation, surfactant dispersant- magnetic stirring and ultrasonic agitation on CNT dispersion in both solution and deposited layer were ascertained.

Dispersion of carbon nanotubes in hydroxyapatite powder by in situ chemical vapor deposition

Preparation and characterization of carbon nanotubes/hydroxyapatite composites

Understanding Interfacial Dynamics: Hydrostatic Pressure-Induced Sono-Dispersion of Carbon Nanotubes

A Powder Metallurgy Route to Fabricate CNT-reinforced Molybdenum-Hafnium-carbon Composites

Facile synthesis of homogeneously dispersed carbon nanotubes on TC4 alloy powder by in-situ CVD and its growth behavior

Effective method to disperse and incorporate Carbon nanotubes in electroless Ni-P deposits

Dispersion-Enhanced Supported Pd Catalysts for Efficient Growth of Carbon Nanotubes Through Chemical Vapor Deposition

Free arc liquid-phase dispersion method for the preparation of carbon nanotube dispersion

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition

In-situ synthesis of high-quality carbon nanotubes on Cu powder by constructing an Al2O3 barrier layer

Effect of carbon nanotube incorporation on the mechanical and physical properties of hydroxyapatite/glass ionomer nanocomposite

Dispersion and Stability of Multi-Walled Carbon Nanotubes in Water As Affected by Humic Acids

A Treatment Method to Give Separated Multi-Walled Carbon Nanotubes with High Purity, High Crystallization and a Large Aspect Ratio

Magnetic hydroxyapatite nanotubes on micro-arc oxidized titanium for drug loading

Optimization of preparation parameters and testing verification of carbon nanotube suspensions used in concrete

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

A comprehensive morphology study on the carbon nanotube agglomerations in cementitious composite

Synthesis of Carbon Nanotubes by Catalytic Chemical Vapor Deposition Using Hydrogen Storage Alloy As A Catalyst