Abstract:Carbon nanotubes (CNTs) have excellent mechanical properties and outstanding aspect ratios, which could remarkably impact the concrete's properties. This research investigates the influence of four different aspect ratios of CNTs with two dosages (i.e., 0.09% and 0.15%, by weight of cement) on hydration, macro performance, and microstructure of low-carbon sulfoaluminate cement-based composite. The experimental results show that adding different aspect ratios of CNTs can enhance the macro performance of the composite. The SM2 (short-CNTs with 0.15% content) group with a small aspect ratio (50–100) has better flexural strength and compressive strength than M0 (plain group), which is increased by 32.7% and 37.0%, respectively, the hydration degree of C 4 A 3 Š (ye'elimite) and C 2 S (belit) are increased by 19.9% and 57.3% than that of the M0 group. At low dosages (0.09%), LM1 (long-CNTs with an aspect ration of 250–1500) and LM2 (long-CNTs with an aspect ration of 125–750) improved the flexural strength of UHPC more than SM1 (short-CNTs with an aspect ration of 100–200). However, LM1 (long-CNTs with a large aspect ratio of 250–1500) has a better enhancement at a dosage of 0.09% than 0.15%. CNTs mainly accelerated the hydration process of the matrix and promoted the generation of more AFt, AH 3 . AFt is a needle-like fiber, and the increase in content is beneficial to improve the toughness and flexural strength of the matrix. The increase in AH 3 content can improve the compressive strength of the matrix. The AH 3 phase can be filled into the pores of the matrix, thereby increasing the compatibility of the matrix and improving the pore structure. The increase in the content of the two hydration products can synergistically enhance the mechanical properties of the matrix. AH 3 is closely connected to CNTs, which can improve the bond strength between the matrix and CNTs. It is observed that AFt is closely associated with AH 3 , filling the pores of the matrix, and the nanoscale AFt, AH 3 , and CNTs work together to improve the strength of the matrix, which differs from the effect of CNTs in OPC. This research prepares UHPC from low-carbon cement, which effectively enhances the life cycle of concrete materials and provides a new idea for reducing carbon emissions.

A comprehensive morphology study on the carbon nanotube agglomerations in cementitious composite

Experimental study on physical and mechanical properties and micro mechanism of carbon nanotubes cement-based composites

Compressive Strength and Microstructure of Multi-Wall Carbon Nanotubes Reinforced Cement Composites

Modification Effects of Carbon Nanotube Dispersion on the Mechanical Properties, Pore Structure, and Microstructure of Cement Mortar

Strength and Electrical Properties of Cementitious Composite with Integrated Carbon Nanotubes

Molecular dynamics study of the mechanical properties of hydrated calcium silicate enhanced by functionalized carbon nanotubes

Failure Modes of Carbon Nanotubes in Cement Composites under Flexural Load

Synergistic effects of CNTs/SiO2 composite fillers on mechanical properties of cement composites

Progress in Research on Carbon Nanotubes Reinforced Cementitious Composites

Investigation on the Mechanical Properties of a Cement-Based Material Containing Carbon Nanotube under Drying and Freeze-Thaw Conditions

Optimization of preparation parameters and testing verification of carbon nanotube suspensions used in concrete

Comparison of compressive fatigue performance of cementitious composites with different types of carbon nanotube

Understanding the role of carbon nanotubes in low-carbon concrete: From experiment to molecular dynamics

Effects of carbon nanotube dosage and aggregate size distribution on mechanical property and microstructure of cemented rockfill

Understanding the role of carbon nanotubes in low carbon sulfoaluminate cement-based composite

Stability of Carboxyl-Functionalized Carbon Nanotubes in Simulated Cement Pore Solution and Its Effect on the Compressive Strength and Porosity of Cement-Based Nanocomposites

One step synthesis and characterization of high aspect ratio network-like carbon nanotubes containing calcium aluminate cement composite powders

Developments and Applications of Carbon Nanotube Reinforced Cement-Based Composites as Functional Building Materials

Effect of Carbon Nanotube and Styrene-Acrylic Emulsion Additives on Microstructure and Mechanical Characteristics of Cement Paste

Effects of Three-Dimensional Graphene–Carbon Nanotube Hybrid on the Mechanical Properties and Microstructure of Cement Paste

Effect of functionalized carbon nanotube on cement mortar: From experiment to DFT research