Abstract:The corrosion of steel structures in aggressive marine environments is a vital issue that induces significant degradation of their performance and lifespan. Herein, three arc-sprayed ZnAl coatings with varied Al contents of 0 wt.%, 15 wt.%, and 50 wt.% were deposited onto a hull steel substrate. The effect of Al content on the long-term corrosion protection performance of ZnAl coatings left in a chloride-containing solution for 840 h was systematically investigated. The evolutions of open-circuit potential, polarization curves, and electrochemical impedance spectroscopy of different ZnAl coatings during the long-term immersion test were examined. The morphologies and phase constitutions of the corrosion products were characterized. The results indicated that the corrosion rate of ZnAl coatings decreased as the Al content increased, and the ZnAl50 coating exhibited the most superior long-term corrosion protection performance. Moreover, for the three ZnAl coatings with an Al contents varying from 0 to 50%, their corrosion rate increased with immersion time in the initial 360 h due to the formation of the unstable and porous corrosion product ZnO; after 360 h immersion, their corrosion rate decreased with the prolonging of immersion time. This was revealed to be related to the formation of different corrosion products. ZnO and stable Al2O3 were the main corrosion products for the pure Zn coating and ZnAl15 coating, respectively. Al2O3 and powerful layered double hydroxide Zn6Al2(OH)16CO3·4H2O were found to be the dominant corrosion products of the ZnAl50 coating, which was responsible for its remarkable long-term corrosion protection performance.

Corrosion resistance of three arc-sprayed Zinc coatings in 3.5% NaCl solution

Corrosion Behaviour of Arc Sprayed Zn55Al Coatings on Q235 Steel in 3.5 wt% NaCl Solution

Corrosion Behaviour of Three Kinds of Arc Sprayed Coatings in Soil

The influences of Zn、Sb、Ti、Zr on the corrosion of ZL114A alloy

Corrosion Behavior of High-Pressure Cold-Sprayed Zn30Al Alloy Coating on Q235 Steel

Corrosion Resistance of Arc-Sprayed Pseudo Zn-Al Alloy Coating

Preparation, Wear Resistance, and Corrosion Performance of Arc-Sprayed Zn, Al, and Zn-Al Coatings on Carbon Steel Substrates

Corrosion behavior and mechanism of electric arc-sprayed Al-Mg coating and Zn-Al-Mg pseudo-alloy coatings

Corrosion Electrochemistry Properties of Thermally Sprayed Zn–Cu–Ti Coating in Simulated Ocean Atmosphere

Corrosion Mechanism of Nanocrystalline Zinc Coating on Steel Sheet Used for Automobile in NaCl Solution

Effect of Al Content on the Long-Term Corrosion Behavior of Arc-Sprayed ZnAl Alloy Coatings

Mechanical and Corrosion Properties in 3.5% NaCl Solution of Cold Sprayed Al-based Coatings

Comparative Study on the Corrosion Behavior of Two Arc Spraying Coatings in Simulated Marine Environments

Corrosion Behavior of Arc-Sprayed Pore-Sealed Zn and Al Coatings in Seawater Containing Sulfate-Reducing Bacteria (SRB)

Corrosion behaviors of arc-sprayed Al/Zn pseudo alloy coating on deep-water drilling riser's surface

Corrosion Performance of Wire Arc Deposited Zinc Aluminum Pseudo Alloy and Zinc 15 Aluminum Alloy Coatings on Steel in Chloride Environment

Corrosion Behavior of High-Strength Pipeline Steel and Coatings in the Simulated Sea Water Environment

Corrosion Electrochemical Behavior of Zn-Al Silane Coating on Carbon Steel

Corrosion Mechanism of Arc Spraying Aluminum Coatings in Marine Environment

Comparative Study on the Corrosion Resistance of Inorganic Zinc-Rich Coating and Thermal-Spray Zinc Coating