Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Electric Field Accelerating Interface Diffusion in Cu∕Ru∕TaN∕Si Stacks During Annealing

Effects of Electric Field Annealing on the Interface Diffusion of Cu/Ta/Si Stacks

Influence of Electric Field Annealing on Atom Diffusion in Cu/Ta/Si Stacks

Modulation of Interfacial and Electrical Properties of ALD-derived HfAlO/Al2O3/Si Gate Stack by Annealing Temperature

Evolution of Interface Chemistry and Dielectric Properties of Hfo2/Ge Gate Stack Modulated by Gd Incorporation and Thermal Annealing

Dislocation assisted face-centered-cubic/body-centered-cubic interface mixing during severe plastic deformation

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

Cu Contact on NiSi/Si with a Ru/TaN Barrier Stack

Atomic Diffusion and Interface Reaction During Diffusion Bonding of SiC/Ti under Alternating Electric Field

The Electromigration Performance Improvement of Al-Si-Cu/Tin/Ti/N+Si Contact

Improved diffusion barrier properties and NiSi thermal stability for the Cu contact with the Ru/TaSiN stack on NiSi/Si

Transmission Electron Microscopy Investigation of the Micro-Defects in Czochralski Silicon

Electromigration Behavior of Cu Metallization Interfacing with Ta Versus TaN at High Temperatures

Influence of applied electric field on atom diffusion behavior and mechanism for W/NiFe interface in diffusion bonding of Steel/NiFe interlayer/W by spark plasma sintering

Contact Engineering of Molybdenum Ditelluride Field Effect Transistors Through Rapid Thermal Annealing

Promoting Inter-Diffusion Behavior of Co/Si (100) Films by High Magnetic Field Annealing

Cu contact on NiSi substrate with a Ta/TaN barrier stack

Effect of the Diffusion Annealing on Concentration Distributions in interfacial Regions of Au/Ag-Cu/Cu-Ni-Zn Laminate Strips

Atomic-scale investigation on diffusion mechanism of immiscible Mo/Cu system under different temperatures and electric field

Influence of Field-Assisted Annealing on Cu(V) Barrier-Less Metallization

Ru/TaSiN with different Ta/Si atomic ratio as barrier for Cu contact on NiSi substrate