Abstract:Piezoelectric vibration energy harvesting has drawn much research interest over the last decade toward the goal of enabling self-sustained wireless sensor nodes. In order to make use of the harvested energy, interface circuits are needed to rectify and manage the energy. Among all active interface circuits, synchronized switch harvesting on inductor (SSHI) and synchronous electric charge extraction are widely employed due to their high energy efficiencies. However, the cold-startup issue still remains, since an interface circuit needs a stable dc supply and the whole system is completely out of charge at the beginning of implementations or after a certain period of time without input vibration excitation. In this paper, a new cold-startup SSHI interface circuit is presented, which dynamically increases the open-circuit voltage generated from the piezoelectric transducer in the cold state to start the system under much lower excitation levels. The proposed circuit is designed and fabricated in a 0.18-mu m CMOS process and experimentally validated together with a custom microelectromechanical system harvester, which is designed with split electrodes to work with the proposed power extraction circuit. The experiments were performed to start the system from the cold state under variable excitation levels. The results show that the proposed system lowers the required excitation level by at least 50% in order to perform a cold startup. This aids restarting of the energy harvesting system under low excitation levels each time it enters the cold state.

Start-up module for low voltage energy harvesting systems

30–300mV input, ultra-low power, self-startup DC-DC boost converter for energy harvesting system

Improved High Step-Up Dc-Dc Converter Based on Active Clamp Coupled Inductor with Voltage Double Cells

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

Subthreshold Voltage Startup Module for Stepup DC-DC Converter

A Cold-Startup SSHI Rectifier for Piezoelectric Energy Harvesters with Increased Open-Circuit Voltage

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

A Low-Voltage Self-Starting Boost Converter Using MPPT with Pulse Multiplication for Energy Harvesting

A New Transformer-Based Startup Scheme with Novel Voltage Monitors for Energy Harvesting

Ultra-Low Power Boost Converter with Constant On-Time-Based Mppt for Energy Harvesting Applications

An On-Chip Transformer-Based Self-Startup Hybrid SIDITO Converter for Thermoelectric Energy Harvesting

A novel start-up scheme for modular multilevel converter

A 400mv Supply Voltage Self-Start Clock Generator for Energy Harvest System.

A fully integrated 28nm CMOS dual source adaptive thermoelectric and RF energy harvesting circuit with 110mv startup voltage

Recent Start-Up Techniques Intended for TEG Energy Harvesting: A Review

DTMOS-Based Pulse Transformer Boost Converter With Complementary Charge Pump for Multisource Energy Harvesting

A Variable Step-Down Conversion Ratio Switched Capacitor DC-DC Converter for Energy Harvesting Systems Working in Intermittent Mode

Integrated Cold-Start of a Boost Converter at 54mv Using a Two-Stage Capacitive Voltage Multiplier

A Startup Scheme for Zero-Voltage-switching PV Inverter

Ultra-low-voltage Low-Power Charge Pump for Solar Energy Harvesting Systems

Self-powered piezoelectric energy harvesting with ultra-low power consumption for low-amplitude ambient vibrations