Abstract:This study involves the development of a full-scale physical model test apparatus to investigate the dynamic performance of the slab track system of a high-speed railway. A portion of a railway ballastless track with embankment and underlying soil strata was built inside a steel box (15 m long, 5 m wide and 6 m high). A sequential-load-generating system consisting of eight high-performance actuators was developed to apply a load that was equivalent to that generated by a train moving at speeds up to 360 km/h. Two loading conditions can be implemented in the tests, a stationary cyclic loading (using one actuator) or a simulated moving train loading (using all eight actuators). Three test cases were performed to demonstrate the capacity of the proposed test facility. The first case was to test the load-sharing ratio of fasteners beneath the rails to determine the load distribution on the track slab. A formula, based on the test results, was proposed to determine the transfer process of the loads between the train wheel and the rail fasteners. The second case was a stationary cyclic loading test, which applied loads with varying frequencies to the rails using a single actuator. The resonance frequency of the track/embankment/soil system was determined in these tests to be about 16 Hz, which coincided with theoretically computed results and field measurements. The final case was to simulate the dynamic excitation resulting from the passage of a train on the track at various speeds (up to 360 km/h). The test results on track vibrations in the physical model test showed reasonably good agreement with field measurements. These three test cases fully demonstrate the ability of the newly developed full-scale test facility to simulate dynamic excitation from trains and its ability to explore the dynamic performance of railway structures under train loadings.

Experimental study on the comprehensive test bench of high-speed train cabinet-end relationship

Research on Motion Characteristic of an Integrated Testing System for High-Speed Train End Relationship Test

Research on the Modeling, Control, and Calibration Technology of a Tracked Vehicle Load Simulation Test Bench

Analysis and Experimental Test on Dynamic Characteristic of 3-Axis Positioner System

Control method of multi-motor's speed synchronization control in dynamometer test bench for multi-axles'vehicle

Design and test analysis of rotary electro-hydraulic control system for a segment assembly test bed

Studies on Frequency Response Characteristics of High-Speed Railway Train End Relationship Test System with Flexible Bases

Force Loading Research on the Transfixion of High-Speed Train

A full-scale physical model test apparatus for investigating the dynamic performance of the slab track system of a high-speed railway

Accuracy characteristics of the testing bench for dynamic transmission error

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

Study on Control System and Precision Positioning Table Identification Technology of Universal Joint Performance Testing Table

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

A Novel Full-Scale Test Facility for Ballastless High-Speed Railroad with Simulated Train Moving Loads

Study on comprehensive performance testing table and intelligent measuring technology of constant velocity universal joint assembly

Simulating Train Moving Loads in Physical Model Testing of Railway Infrastructure and Its Numerical Calibration

Vibration analysis of bogie components based on electromechanical coupling model and test for high speed train

A Composite High-Speed and High-Precision Positioning Approach for Dual-Drive Gantry Stage

Test Case Study of High-Speed Railway Train Control System for Typical Operation Scenarios*

Full scale model tests on slab track constructed on embankment