Abstract:Highlights • A new multifunction proportional control triaxial stress loading apparatus is presented. • A state perception and processing method is illustrated to realize the effective integration of multipleloading operations. • A viable control strategy and controller are designed to the force control that rejecting the fluctuate deviation. • The coupled position and pressure loading controller are designed utilizing a sliding mode control method. • Experiment results are executed to verify the control effectiveness of the controller. A new multifunctional proportional control triaxial stress loading apparatus is presented in this study, which can apply an output force on coal rock to simulate the conditions of triaxial stress loading, aiming at solving the problems of excessive consideration of static indices in the design and the incompleteness of the simulation and test verification system for the test parts at the performance analysis stage. This apparatus mainly combines the configuration of a triaxial stress loading system which can meet the stress loading requirements under different operating conditions, with the effective integration of multiple pressure loading operations based on the electrohydraulic proportional control method. In this context, a pressure and position combined control strategy based on the sliding mode is proposed to control the vertical and longitudinal loading hydraulic cylinders. Then, a co-simulation mode including the triaxial stress loading hydraulic system is established to verify the control strategy, system response characteristics and selection of the controller parameters. Furthermore, a multifunctional stress loading experimental platform is developed, and the stress loading characteristics with the proposed strategy are tested and analyzed. The results show that the triaxial stress loading hydraulic system can meet the response characteristics, the fluctuating deviation of the constant loading test can be restricted to 8.5%, the tracking error of the variable loading test is small, the minimum response time of instantaneous loading can reach 2.8 s, and the stress loading effect is noticeable. The experimental platform fully indicates that the stress loading system with the state perception and processing method as the core can meet a variety of verification indices of constant, variable and instantaneous loading tests. This research provides technical support for the smooth, synchronous control and intelligent operation of various types of hydraulic actuator machines.

Force Loading Research on the Transfixion of High-Speed Train

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Decoupled Adaptive Terminal Sliding Mode Control Strategy for a 6-DOF Electro-Hydraulic Suspension Test Rig with RBF Coupling Force Compensator

Research on the Modeling, Control, and Calibration Technology of a Tracked Vehicle Load Simulation Test Bench

Study On Feedback Control Strategy Of Generalized Load System

The Force Control Method Based on 6-DOF Parallel Electro-hydraulic Servo Mechanism

Research on Motion Characteristic of an Integrated Testing System for High-Speed Train End Relationship Test

Research on Load Unbalance Problem and Control Strategy of Traction Motors in High-speed Train

Development of Load System for High-Speed Railway Rolling

Novel multi-degree-of-freedom force–displacement mixed control framework for low loading rate substructure hybrid testing

Control nodes based loading method: A versatile approach for multi‐degree‐of‐freedom loading in quasi‐static tests and hybrid simulations

Multi‐degree‐of‐freedom force‐displacement mixed control strategy for structural testing

Electric Control Loading System Control Strategy Study Based on LMI

Development of 6-DOF motion simulator for firing control system testing

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

Inverse Model Control for Inner Loop of Control Loading System on Flight Simulator

Force-Displacement Mixed Control Method for 3-DOFs Loading System

Development of Force-Displacement Mixed Control for Quasi-Static Test of Structure with Multiple Degrees of Freedom

Pseudo-dynamic Tests with Effective Force Control Method Based on Force-Loading Control Strategy

Electrohydraulic proportional position and pressure loading control utilizing a state perception and processing method

Experimental study on the comprehensive test bench of high-speed train cabinet-end relationship