Abstract:This study involves the development of a full-scale physical model test apparatus to investigate the dynamic performance of the slab track system of a high-speed railway. A portion of a railway ballastless track with embankment and underlying soil strata was built inside a steel box (15 m long, 5 m wide and 6 m high). A sequential-load-generating system consisting of eight high-performance actuators was developed to apply a load that was equivalent to that generated by a train moving at speeds up to 360 km/h. Two loading conditions can be implemented in the tests, a stationary cyclic loading (using one actuator) or a simulated moving train loading (using all eight actuators). Three test cases were performed to demonstrate the capacity of the proposed test facility. The first case was to test the load-sharing ratio of fasteners beneath the rails to determine the load distribution on the track slab. A formula, based on the test results, was proposed to determine the transfer process of the loads between the train wheel and the rail fasteners. The second case was a stationary cyclic loading test, which applied loads with varying frequencies to the rails using a single actuator. The resonance frequency of the track/embankment/soil system was determined in these tests to be about 16 Hz, which coincided with theoretically computed results and field measurements. The final case was to simulate the dynamic excitation resulting from the passage of a train on the track at various speeds (up to 360 km/h). The test results on track vibrations in the physical model test showed reasonably good agreement with field measurements. These three test cases fully demonstrate the ability of the newly developed full-scale test facility to simulate dynamic excitation from trains and its ability to explore the dynamic performance of railway structures under train loadings.

Studies on Frequency Response Characteristics of High-Speed Railway Train End Relationship Test System with Flexible Bases

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Research on Motion Characteristic of an Integrated Testing System for High-Speed Train End Relationship Test

Vibration analysis of bogie components based on electromechanical coupling model and test for high speed train

A Theoretical Investigation on Characteristic Frequencies of Ground Vibrations Induced by Elevated High Speed Train

DYNAMIC RESPONSE ANALYSIS OF TRACK SYSTEM AND UNDERGROUND RAILWAY TUNNEL IN SATURATED SOIL SUBJECTED TO A MOVING TRAIN LOAD

Experimental study on the comprehensive test bench of high-speed train cabinet-end relationship

Comprehensive validation of three-dimensional finite element modelling of wheel-rail high-frequency interaction via the V-Track test rig

Key Technologies of Physical and Virtual Test Rig for Railway Freight Car body

Force Loading Research on the Transfixion of High-Speed Train

A full-scale physical model test apparatus for investigating the dynamic performance of the slab track system of a high-speed railway

Research on Lateral Vibration Coupling Mechanism of a High-Speed Train Based on Singular Coefficients

Analysis and Verification of Dynamic Characteristics of Flexible Spatial Parallel Robot

Spatial distribution of vibration accelerations in coupled rail-embankment-foundation system on high-speed railway under moving loads

Analysis of Vibration and Frequency Transmission of High Speed EMU with Flexible Model

An efficient modelling approach to obtain dynamic properties of equipment coupled to the bogie of vehicle

Full scale model tests on slab track constructed on embankment

Extraction of free body frequency response functions from flexibly constrained test

A frequency and amplitude dependent model of rail pads for the dynamic analysis of train-track interaction

Effect of Track Spectrum on the Dynamic Responses of Passenger–Train–Bridge System