Implementation and Experiment of Dual-Mass Vibratory Gyroscope with High Quality Factor

Fangxiu Jia,Anping Qiu,Qin Shi,Yan Su

DOI: https://doi.org/10.1109/icsens.2012.6411233

2012-01-01

Abstract:The implementation of the dual-mass MEMS vibratory gyroscope in device-level vacuum packing was presented. The electrostatic actuation and capacitive sensing methods were adopted in electrical design of gyroscope. The self-resonance drive circuit with automatic gain control was employed in the drive closed-loop, and the open loop detect circuit was used. In order to reduce environment impact on the performances of gyroscope, real-time temperature compensation system was designed using Platinum resistor as temperature sensor. Experiment results show that the MEMS gyroscope can achieve the performances as follows: mechanical quality factor is above 100 000, the operating range is ±500°/s with scaling factor 21.453mV/°/s, nonlinearity and asymmetry error are better than 200ppm, and the 1σ bias stability <; 8°/h with the bandwidth over 100Hz. The complete MEMS gyroscope draws about 11mA under power supply ±12V, and the whole system volume is 31mm*31mm*12mm.