Abstract:This paper deals with the actuator movement measurement for objective lens actuator in optical pickup. An optical pick-up is an optical apparatus to record and/or reproduce information from an optical disc, and move in a radial direction on the optical disc. The objective lens actuator helps move an objective lens in a tracking direction, a focusing direction, and/or a tilting direction, spot the laser beam on a correct portion of the optical disc. It basically carries out tracking and focusing movements, i.e., a biaxial movement. For high recording density media, the optical pickup actuator requires a triaxial or quadriaxial movement including a tilting movement in addition to the existing biaxial movement. For information recording and/or reproducing correctly, the movement range of the actuator should be proper to accurately follow the disc deviation. Alternative methods of movement measurement have been proposed. One method employed now uses a plane plate reflecting laser beam which describes the movement. It requires two laser devices for tracking direction and the focusing direction measurement respectively. Here we propose a method for describing the tracking and focusing movements on one laser device. In this method an external cone is used, with the same weight as the objective lens. It could reflect laser beam back to the linear CCD. The diameter of the external cone base is equal to that of the objective, which is crucial for a stable placement. The ratio of height to width of the external cone is designed and optimized, so that to satisfy the accuracy of the movement measurement and minimize the device. Measurement with this method has proved satisfactory for certain CD/DVD optical pickup.

A High-Resolution Measurement Device for Detecting the Positioning Accuracy of the Optical Fiber Positioner

A Novel Method to Simultaneously Measure the Straightness

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

One-Dimensional Angle Measurement Error Calibration Technique for Fiber Optic Gyroscope

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

A Dynamic Angle Metrology System Based on Fibre-Optic Gyroscope and Rotary Table

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A Fiber-Based Chromatic Dispersion Probe for Simultaneous Measurement of Dual-Axis Absolute and Relative Displacement

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Force-Position Photo-Robotic Approach for the High-Accurate Micro-Assembly of Photonic Devices

Improved Location Algorithm for High-spatial-resolution in Fiber Optic Line-based Sensor

High-Precision distributed fiber optic vibration positioning system with grating array

High Precision Machining of a Displacement Sensor for Helicoidal Motions

Analysis and Design of Fiber Microprobe Displacement Sensors Including Collimated Type and Convergent Type for Ultra-Precision Displacement Measurement

A Novel Optical Fiber Displacement Measurement System

Two-stage Positioning for High-Density Optical Disk Mastering

Study on the Movement Measurement for an Objective Lens Actuator in Optical Pickup

Two Degree-of-Freedom Fiber-Coupled Heterodyne Grating Interferometer with Milli-Radian Operating Range of Rotation