Abstract:Conventional separators applied in lithium batteries face limitations like low porosity, poor electrolyte wettability, lower cation selectivity, and thermal instability, which impact battery performance and safety characteristics. Besides the challenge in separator design, transition metal ion migration from positive electrodes during cycling greatly accelerates capacity fading because of unrestricted diffusion of transition metal cation across the separator. This study explores an innovative strategy for the separator design by incorporating MXene (spraying MXene solution on both sides of the separator), a two-dimensional material, into electrospun Polyacrylonitrile/Polyetherimide membranes with the function of cation selection. Li + can be accelerated, and its transference number increases along with the anion limitation in the MXene layer. Ni, Co, and Mn ion dissolution from the positive electrode is inhibited due to the cation selectivity of the MXene layer. Leveraging electrospinning advantages, the resultant membranes exhibit high porosity, excellent liquid absorption, mechanical strength, and superior thermal properties. Benefiting from MXene's layered structure and excellent adsorption ability, the membrane significantly inhibits the dissolution of transition metal ions while enabling smooth lithium deposition due to its cation selectivity. Eventually, the Li||NMC811 batteries deliver outstanding cyclic performance (91.3% capacity retention after 200 cycles) and robust lithium dendrite suppression (800 hours of stable cycling). Moreover, the MXene-modified membrane demonstrates exceptional electrolyte wettability, significantly improving ionic transference number (0.67) and conductivity (1.6 mS cm -1 ). Modification of membrane surfaces with MXene offers insights into addressing transition metal ion migration from the positive electrode material perspective, providing a promising avenue for high-performance LIBs.

Enhanced Low Temperature Performances of Expanded Commercial Mesocarbon Microbeads (MCMB) As Lithium Ion Battery Anodes

CHARGE DISCHARGE PROPERTIES OF THE MESOCARBON MICROBEADS FOR THE ANODS OF LITHIUM ION BATTERIES

Preparation and Lithium Insertion Performance of Mesocarbon Microbeads

Wet-chemical Synthesized MCMB@Si@C Microspheres for High-Performance Lithium-Ion Battery Anodes.

Enhanced Electrochemical Performance of Mesocarbon‐Microbeads‐Based Anodes Through Air Oxidation for Sodium‐Ion Batteries

Multifunctional asymmetric electrolyte membrane encouraging durable lithium-metal batteries in wide temperature variations

An innovative and efficient method for the preparation of mesocarbon microbeads and their use in the electrodes of lithium ion batteries and electric double layer capacitors

Stable Low-Temperature Lithium Metal Batteries with Dendrite-Free Ability Enabled by Electrolytes with Cooperative Li+-Solvation

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

Enhancing high-temperature storage performance for the commercial lithium-ion battery via a effective addtive strategy

Mesocarbon Microbeads Boost the Electrochemical Performances of LiFePO 4 ||Li 4 Ti 5 O 12 through Anion Intercalation

Tuning the End Alkyl Chain of the Ether Solvent to Stabilize the Electrode/Electrolyte Interfaces in the NCM-Li Battery

Capacity Fade of Li[sub 1+x]mn[sub 2−x]o[sub 4]-Based Lithium-Ion Cells

High-Performance Lithium Batteries Achieved by Electrospun MXene-Enhanced Cation-Selective Membranes

Enhanced low-temperature resistance of lithium-ion batteries based on methyl propionate-fluorinated ethylene carbonate electrolyte

High-Energy-Density Lithium Metal Batteries with Impressive Li+ Transport Dynamic and Wide-Temperature Performance from -60 to 60 °C

Activating Ultra-Low Temperature Li-metal Batteries by Tetrahydrofuran-Based Localized Saturated Electrolyte

High‐Energy Rechargeable Metallic Lithium Battery at −70 °C Enabled by a Cosolvent Electrolyte

Loosely coordinating diluted highly concentrated electrolyte toward −60 °C Li metal batteries

In Situ Experimental Measurement of the Mechanical Properties of Carbon-Based Electrodes During the Electrochemical Process

Ionic Pumping Effect at the Tailored Mesoporous Carbon Interface for an Extra-Stable Lithium Ion Battery at Low Temperatures