Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Multifunctional asymmetric electrolyte membrane encouraging durable lithium-metal batteries in wide temperature variations

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

Anionic Coordination Manipulation of Multilayer Solvation Structure Electrolyte for High‐Rate and Low‐Temperature Lithium Metal Battery

Stable Low-Temperature Lithium Metal Batteries with Dendrite-Free Ability Enabled by Electrolytes with Cooperative Li+-Solvation

Wide-temperature Rechargeable Li Metal Batteries Enabled by an In-Situ Fabricated Composite Gel Electrolyte with a Hierarchical Structure

In-situ constructing “ceramer” electrolytes with robust-flexible interfaces enabling long-cycling lithium metal batteries

Strongly Solvating Triglyme-based Electrolyte Realizes Stable Lithium Metal Batteries at High-Voltage and High-Temperature

All-Fluorinated Electrolyte Engineering Enables Practical Wide-Temperature-Range Lithium Metal Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

Metal‐Organic Coordination Enhanced Metallopolymer Electrolytes for Wide‐Temperature Solid‐State Lithium Metal Batteries

An artificial interfacial layer with biomimetic ionic channels towards highly stable Li metal anodes

Electrolyte Engineering to Construct Robust Interphase with High Ionic Conductivity for Wide Temperature Range Lithium Metal Batteries

Enabling highly stable lithium metal batteries by using dual-function additive catalyzed in-built quasi-solid-state polymer electrolytes

Metal‐Organic Framework Sandwiching Porous Super‐Engineering Polymeric Membranes as Anionphilic Separators for Dendrite‐free Lithium Metal Batteries

Multiple Dynamic Bonds‐Driven Integrated Cathode/Polymer Electrolyte for Stable All‐Solid‐State Lithium Metal Batteries

Achieving Practical High‐Energy‐Density Lithium Metal Batteries by a Dual‐Anion Regulated Electrolyte

A 3D Cross‐Linked Metal‐Organic Framework (MOF)‐Derived Polymer Electrolyte for Dendrite‐Free Solid‐State Lithium‐Ion Batteries

Boosting the Temperature Adaptability of Lithium Metal Batteries via a Moisture/Acid‐Purified, Ion‐Diffusion Accelerated Separator

Advanced Ultralow‐Concentration Electrolyte for Wide‐Temperature and High‐Voltage Li‐Metal Batteries

Dual-functional Separators Regulating Ion Transport Enabled by 3D-Reinforced Polyimide Microspheres Protective Layer for Dendrite-Free and High-Temperature Lithium Metal Batteries

A robust crosslinked polysiloxane-embedded nanofiber membrane for long-cycle lithium metal batteries