Abstract:The overall performance of carbon-based materials for sodium-ion batteries (SIBs) is still restricted by the sluggish transfer kinetics of Na+ and limited rate capability. Specifically, introducing ultramicropores (pores width <0.7 nm) into carbon materials may be effective in improving the anode performance of SIBs. However, due to the difficulty of their synthesis and homogeneity regulation, ultramicroporous carbon as advanced SIB anodes as well as their sodium storage mechanisms have seldom been investigated. Herein, carbon spheres with centralized ultramicropores and abundant C═O is facilely obtained by combining the in situ ion activation and the novel quantitative air-assisted carbonization process for the first time. The quantitative air acts not only as a mild agent to activate the materials, but also as an oxygen dopant for forming oxygen-containing functional groups. As the optimized anode, quantitative air-assisted carbonized spheres with a precursor weight of 0.3 g (QACS-0.3) delivers a high rate capability (265 and 121 mAh g–1 at 0.05 and 5.0 A g–1, respectively) and good cycling stability (126 mAh g–1 after 5000 cycles at 5.0 A g–1). Kinetic analysis, theoretical calculation, and ex situ testing technologies reveal that the ultramicropores can facilitate the diffusion of Na+ below 0.2 V; the synergistic effect of defects, C═O, and ultramicropores can extend the discharge curves and effectively improve the adsorption capacity of carbon materials. Additionally, a new discharge model is proposed to explain the sodium storage behaviors in these electrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01885?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01885</a>.XRD patterns, CV curves, and cycling performance of DCS and QACS-0.3; calculation method for GITT; ex XPS curves of the charging process; SEM and TEM images, XRD, Raman, XPS, and nitrogen adsorption–desorption curves of QACSs; CV, GC, cycling performance, electrical resistivity, and EIS plots of QACSs; SEM images, pore size distribution, and XPS spectra of DPCS and QPCS; and comparison of cycling and rate performance of QACS-0.3 with other glucose-derived materials for sodium-ion batteries (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01885/suppl_file/sc1c01885_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced Electrochemical Performance of Mesocarbon‐Microbeads‐Based Anodes Through Air Oxidation for Sodium‐Ion Batteries

Anode performance of NaOH-etched mesocarbon microbeads for sodium-ion batteries

Rational Design of Moo2−Based Electrodes by Crystal Surface Engineering Control for Ultra-Long Life Sodium Ion Batteries

Ultrafine MoO2-Carbon Microstructures Enable Ultralong-Life Power-Type Sodium Ion Storage by Enhanced Pseudocapacitance

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Biomass‐Derived Micro‐Mesoporous Carbon with Oxygen Functional Groups for High‐Rate Na–S Batteries at Room Temperature

Optimizing Electrochemical Performance in Sodium-Ion Batteries Using O3-type Na0.90Cu0.22Fe0.30Mn0.48O2 and Hard Carbon

Engineering Ultramicroporous Carbon with Abundant C═O as Extended “Slope-Dominated” Sodium Ion Battery Anodes

Improved Oxygen Evolution and Oxygen Reduction Behavior of NiCo 2 O 4 : Revisiting the Use of Mesocarbon Microbeads

Molybdenum carbide nanocrystals modified carbon nanofibers as electrocatalyst for enhancing polysulfides redox reactions in lithium‐sulfur batteries

Stabilizing the Layer‐Structured Oxide Cathode by Modulating the Oxygen Redox Activity for Sodium Ion Batteries

Improving Oxygen‐Redox‐Active Layered Oxide Cathodes for Sodium‐Ion Batteries Through Crystal Facet Modulation and Fluorinated Interfacial Engineering

Balancing Defects and Microcrystals in Carbon Anodes by Molecular Chemistry Method for Sodium‐Ion Batteries

A High‐Efficiency Mo2C Electrocatalyst Promoting the Polysulfide Redox Kinetics for Na–S Batteries

Incorporating TiO2 nanoparticles into the multichannels of electrospun carbon fibers to increase the adsorption of polysulfides in room temperature sodium-sulfur batteries

Dual carbon confined MoS2 hierarchical microspheres as high-performance anode for sodium-ion batteries with superior cycling stability

Crumpling Carbon‐Pillared Atomic‐Thin Dichalcogenides and CNTs into Elastic Balls as Superior Anodes for Sodium/Potassium‐Ion Batteries

Expanded mesocarbon microbead cathode for sodium-based dual-ion battery with superior specific capacity and long-term cycling stability

Carbon-coated MoSe2/MXene heterostructures as active materials for high-performance Na+ batteries

Engineering surface oxygenated functionalities on commercial hard carbon toward superior sodium storage

Sulfur-doping biomass based hard carbon as high performance anode material for sodium-ion batteries