Abstract:Sodium-ion batteries operating at room temperature have emerged as a generation of energy storage devices to replace lithium-ion batteries; however, they are limited by a lack of anode materials with both an adequate lifespan and excellent rate capability. To address this issue, we developed Nb2CTx MXene-framework MoS2 nanosheets coated with carbon (Nb2CTx@MoS2@C) and constructed a robust three-dimensional cross-linked structure. In such a design, highly conductive Nb2CTx MXene nanosheets prevent the restacking of MoS2 sheets and provide efficient channels for charge transfer and diffusion. Additionally, the hierarchical carbon coating has a certain level of volume elasticity and excellent electrical conductivity to guarantee the intercalation of sodium ions, facilitating both fast kinetics and long-term stability. As a result, the Nb2CTx@MoS2@C anode delivers an ultrahigh reversible capacity of 530 mA h g–1 at 0.1 A g–1 after 200 cycles and very long cycling stability with a capacity of 403 mA h g–1 and only 0.01% degradation per cycle for 2000 cycles at 1.0 A g–1. Moreover, this anode has an outstanding capacity retention rate of approximately 88.4% from 0.1 to 1 A g–1 in regard to rate performance. Most importantly, the Nb2CTx@MoS2@C anode can realize a quick charge and discharge at current densities of 20 or even 40 A g–1 with capacities of 340 and 260 mAh g–1, respectively, which will increase the number of practical applications for sodium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c00849?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c00849</a>.Further experimental characterization (SEM, TEM image, TGA curves, XRD pattern, and XPS spectra) of Nb2CTx@MoS2@C, Nb2CTx@MoS2, and MoS2@C and pristine Nb2CTx MXene nanosheets; electrochemical performance of MoS2@C and Nb2CTx MXene for SIBs; optimized structures of theoretical calculations of the MXene; in/ex situ XRD in first discharge and discharge as anode for sodium-ion batteries or different states; additional experimental data and models for calculations (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c00849/suppl_file/nn1c00849_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Anode performance of NaOH-etched mesocarbon microbeads for sodium-ion batteries

Enhanced Electrochemical Performance of Mesocarbon‐Microbeads‐Based Anodes Through Air Oxidation for Sodium‐Ion Batteries

Rational Design of Moo2−Based Electrodes by Crystal Surface Engineering Control for Ultra-Long Life Sodium Ion Batteries

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Hierarchical MoS2/Carbon microspheres as long-life and high-rate anodes for sodium-ion batteries

Functionalized graphene assisted the formation of mesocarbon microbeads with ultra-large size and loose microcrystalline structure from petroleum pitch for sodium-ion batteries anode

Carbon-Reinforced Nb 2 CT x MXene/MoS 2 Nanosheets as a Superior Rate and High-Capacity Anode for Sodium-Ion Batteries

Commercial Carbon Molecular Sieves As A High Performance Anode for Sodium-Ion Batteries

Sulfur-doping biomass based hard carbon as high performance anode material for sodium-ion batteries

Construction of MoS2-nitrogen-deficient graphitic carbon nitride anode toward high performance Sodium-ions batteries

Amidation structure design of carbon materials enables high energy and power density symmetric Sodium-ion battery

Nitrogen and sulfur co-doped mesoporous carbon derived from ionic liquid as high-performance anode material for sodium ion batteries

Carbon Coated Bimetallic Sulfide Hollow Nanocubes as Advanced Sodium Ion Battery Anode

Investigations on the Electrochemical and Mechanical Properties of Sb 2 O 3 Nanobelts by In Situ Transmission Electron Microscopy

Mechanistic Insights into the Intercalation and Interfacial Chemistry of Mesocarbon Microbeads Anode for Potassium Ion Batteries

Enhanced rate performance of nanoporous nickel-antimony anode for sodium ion batteries

Exploration of electrochemical behavior of Sb-based porous carbon composites anode for sodium-ion batteries

3D ordered macroporous amorphous Nb2O5 as anode material for high-performance sodium-ion batteries

Mussel-inspired nitrogen-doped porous carbon as anode materials for sodium ion batteries

Electrochemical Performances of Si-coated MCMB As Anode Material in Lithium-Ion Cells