Abstract:Conventional separators applied in lithium batteries face limitations like low porosity, poor electrolyte wettability, lower cation selectivity, and thermal instability, which impact battery performance and safety characteristics. Besides the challenge in separator design, transition metal ion migration from positive electrodes during cycling greatly accelerates capacity fading because of unrestricted diffusion of transition metal cation across the separator. This study explores an innovative strategy for the separator design by incorporating MXene (spraying MXene solution on both sides of the separator), a two-dimensional material, into electrospun Polyacrylonitrile/Polyetherimide membranes with the function of cation selection. Li + can be accelerated, and its transference number increases along with the anion limitation in the MXene layer. Ni, Co, and Mn ion dissolution from the positive electrode is inhibited due to the cation selectivity of the MXene layer. Leveraging electrospinning advantages, the resultant membranes exhibit high porosity, excellent liquid absorption, mechanical strength, and superior thermal properties. Benefiting from MXene's layered structure and excellent adsorption ability, the membrane significantly inhibits the dissolution of transition metal ions while enabling smooth lithium deposition due to its cation selectivity. Eventually, the Li||NMC811 batteries deliver outstanding cyclic performance (91.3% capacity retention after 200 cycles) and robust lithium dendrite suppression (800 hours of stable cycling). Moreover, the MXene-modified membrane demonstrates exceptional electrolyte wettability, significantly improving ionic transference number (0.67) and conductivity (1.6 mS cm -1 ). Modification of membrane surfaces with MXene offers insights into addressing transition metal ion migration from the positive electrode material perspective, providing a promising avenue for high-performance LIBs.

Ionic Pumping Effect at the Tailored Mesoporous Carbon Interface for an Extra-Stable Lithium Ion Battery at Low Temperatures

Enhanced Low-Temperature Li-ion Storage in MXene Titanium Carbide by Surface Oxygen Termination

Bifunctional Interphase Promotes Li+ De‐Solvation and Transportation Enabling Fast‐Charging Graphite Anode at Low Temperature

Interfacial modulation of hollow ZnS-SnS2 microboxs by Ti3C2Tx MXene to construct three-dimensional hybrid anodes for lithium-ion batteries with ultra high stability at low temperature

High-Performance Lithium Batteries Achieved by Electrospun MXene-Enhanced Cation-Selective Membranes

Low-temperature and high-rate-charging lithium metal batteries enabled by an electrochemically active monolayer-regulated interface

Hierarchically porous MXene decorated carbon coated LiFePO4 as cathode material for high-performance lithium-ion batteries

Gel Polymer Electrolyte Enables Low-Temperature and High-Rate Lithium-Ion Batteries via Bionic Interface Design

Fe3+-stabilized Ti3C2Tx MXene Enables Ultrastable Li-ion Storage at Low Temperature

Temperature-dependent interphase formation and Li+ transport in lithium metal batteries

Tailoring solid-electrolyte interphase and solvation structure for subzero temperature, fast-charging, and long-cycle-life sodium-ion batteries

In-Plane Mesoporous 3D Flower-Like Mo2Ti2C3Clx MXene Anodes for Li-Ion Batteries: From Structure to Performance

A MoS2/Carbon Hybrid Anode for High-Performance Li-ion Batteries at Low Temperature

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

Tailoring Low Temperature Performance of Lithium-ion Battery via Rational Designing Interphase on Anode.

Construction of two-dimensional bimetal (Fe-Ti) oxide/carbon/MXene architecture from titanium carbide MXene for ultrahigh-rate lithium-ion storage

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

Thermal Percolation of Antiperovskite Superionic Conductor into Porous MXene Scaffold for High-Capacity and Stable Lithium Metal Battery.

Efficient Low-Temperature Cycling of Lithium Metal Anodes by Tailoring the Solid-Electrolyte Interphase

Flexible 3D Porous MXene Foam for High-Performance Lithium-Ion Batteries