Abstract:<p>Fly ash (FA) is a common industrial by-product, which is usually used as raw materials of alkali-activated geopolymer or cement additive. However, there are few studies on phosphoric acid-based geopolymer cement synthesized with FA. In this study, FA phosphoric acid-based geopolymer (FAPG) was prepared by using low-calcium FA as raw material and phosphoric acid (PA) as reactant at room temperature. Microscopic properties and geopolymerization mechanism were studied by X-ray diffraction, scanning electron microscopy, mercury intrusion porosimetry, nuclear magnetic resonance instrument and Fourier transform infrared spectroscopy. The hydration characteristics were studied by isothermal calorimetry, and the thermal properties were explored by thermogravimetric analysis. Additionally, the setting time, compressive strength, pH and electrical conductivity of FAPG were measured. The results indicated that room-temperature cured FAPG paste activated with 50% PA and 0.3 liquid–solid mass ratio (L/S) yielded a maximum compressive strength during 0–90 days of curing. As curing time increased, the strength increased for FAPG with 50% PA, but increased at first and then scarcely increased for other FAPG pastes. The compressive strength decreased with L/S increasing. As curing time increased, the pH increased and electrical conductivity decreased. The initial and final setting time, and fluidity decreased with increasing PA concentration but increased with L/S increasing. The FAPG paste was a composite structure composed of crystalline and amorphous phase. The crystalline phase was composed of Brushite, Monetite and Berlinite, and the amorphous phase was composed of -Al-O-P-, -Si-O-P- and Si-O-Al-O-P- units. The average pore diameter of FAPG ranged from 37.38 to 64.44 nm. Heating to 1200 °C, FAPG paste presented four stages of mass loss. The total hydration heat increased with PA concentration increasing.</p>

A Preliminary Study on Class F Fly Ash-Based Geopolymers Formed by Pressure As Acid-Resisting Bricks

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Geopolymer bricks prepared by MSWI fly ash and other solid wastes: Moulding pressure and curing method optimisation

Physico-chemical properties and durability of a fly-ash-based geopolymer

Chloride resistance of class C/class F fly ash-based geopolymer mortars with different strength grades

Synthesis Factors Affecting Mechanical Properties, Microstructure, and Chemical Composition of Red Mud–fly Ash Based Geopolymers

Study of Manufacture Process and Properties of Fly Ash-Based Geopolymers

Effect of Waste Glass Powder and Bamboo Fiber on the Physico-Mechanical Properties and High-Temperature Behavior of a Fly Ash-Based Geopolymer

Preparation and properties of geopolymer containing phosphoric acid-activated fly ash and mechanically-milled kaolinite: Experiments and density function theory

Utilization of Calcium Carbide Residue as Solid Alkali for Preparing Fly Ash-Based Geopolymers: Dependence of Compressive Strength and Microstructure on Calcium Carbide Residue, Water Content and Curing Temperature

A high-strength red mud–fly ash geopolymer and the implications of curing temperature

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Experimental study on full-volume fly ash geopolymer mortars: Sintered fly ash versus sand as fine aggregates

Mechanical and microscopic properties of fly ash phosphoric acid-based geopolymer paste: A comprehensive study

Influence of Foaming Agent/Water Ratio and Foam/Geopolymer Paste Ratio to the Properties of Fly Ash-based Lightweight Geopolymer for Brick Application

Effect of Fine Aggregate Particle Characteristics on Mechanical Properties of Fly Ash-Based Geopolymer Mortar

Cleaner geopolymer prepared by co-activation of gasification coal fly ash and steel slag: durability properties and economic assessment

Reaction Kinetics of Red Mud-Fly Ash Based Geopolymers: Effects of Curing Temperature on Chemical Bonding, Porosity, and Mechanical Strength

Properties of geopolymer based on fly ash

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Performance Optimization of FA-GGBS Geopolymer Based on Response Surface Methodology