Abstract:One kind geopolymer composite cementitious material was synthesized under the activation of modified water glass, using reclaimed lime-fly ash macadam powder (RLFMP) as basic raw material, fly ash (FA) and ordinary Portland cement (OPC) as compound additive. The effects of OPC content, alkali content, water glass modulus and water-solid ratio on the setting time, compressive and flexural strength of the geopolymers cured at room temperature were investigated by orthogonal experiment. In addition, the mineralogical phases, micromorphology and pore distribution characteristics of the final products were characterized through X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR) and Mercury Intrusion Porosimetry (MIP). The results indicated that the OPC content had the most significant effect on the setting time and mechanical properties of geopolymers. With the increase of OPC content, the setting time of geopolymer mortars was greatly shortened, and the compressive strength and flexural strength were obviously improved. When OPC content was 10% of the total cementitious powder mass, alkali content was 11%, water glass modulus was 1.4, and water-solid ratio was 0.35, the 28 day compressive strength of geopolymer pastes cured at room temperature reached the highest of 43.2 MPa. Microstructure analysis showed that the incorporation of OPC promoted the full dissolution of silicaalumina raw materials in alkaline environment, improved the degree of geopolymerization and formed the C(A)-S-H gel products in the reaction system. The C-(A)-S-H gel products were synergistic with the N-A-S-H gel products generated by pure geopolymerization to enhance the compactness and adhesion of the matrix, which was conducive to the improvement of the mechanical properties of geopolymer. This study demonstrates the feasibility of preparing geopolymer with RLFMP at room temperature, which widens the source of geopolymer raw materials and provides a new type of geopolymer composite.

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

Performances and microstructure of one-part fly ash geopolymer activated by calcium carbide slag and sodium metasilicate powder

Effect of Ultrafine Fly Ash and Water Glass Content on the Performance of Phosphorus Slag-Based Geopolymer

Accelerated Carbonation Pretreatment of Municipal Solid Waste Incineration Fly Ash and Its Conversion to Geopolymer with Coal Fly Ash

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Utilization of Calcium Carbide Residue as Solid Alkali for Preparing Fly Ash-Based Geopolymers: Dependence of Compressive Strength and Microstructure on Calcium Carbide Residue, Water Content and Curing Temperature

The effect of different types of class F fly ashes on the mechanical properties of geopolymers cured at ambient environment

A Clean Approach to High-Strength Fly Ash-Based Geopolymers: Multi-Granular Screening with NaAlO2 Enhancement

Utilization of Thermally Treated Flue Gas Desulfurization (FGD) Gypsum and Class-C Fly Ash (CFA) to Prepare CFA-based Geopolymer

Utilization of OPC and FA to enhance reclaimed lime-fly ash macadam based geopolymers cured at ambient temperature

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism

Preparation and properties of geopolymer containing phosphoric acid-activated fly ash and mechanically-milled kaolinite: Experiments and density function theory

Impact of Micro Characteristics on the Formation of High-Strength Class F Fly Ash-Based Geopolymers Cured at Ambient Conditions

Synthesis of High Strength Ambient Cured Geopolymer Composite by Using Low Calcium Fly Ash

Utilization of Fly Ash to Enhance Ground Waste Concrete-Based Geopolymer

A factorial experimental analysis of using wood fly ash as an alkaline activator along with coal fly ash for production of geopolymer-cementitious hybrids

In-Depth Insight into the Effects of Steel Slag and Calcium Hydroxide on the Properties of a Fly Ash-Red Mud Geopolymer

Optimization of Technological Parameters for Preparation of Geopolymers Fabricated with Pulverized Fly Ash