Abstract:Fly ash-slag-based geopolymer is a grouting material with good fluidity and excellent mechanical and eco-friendly properties. The geopolymer can react chemically with the inert minerals of road subgrade under alkali excitation to form a good interfacial bond between road subgrade; therefore, it is suitable for the repair of weak road sections. In order to solve the problems such as the difficulty to store and transport the liquid activator of existing geopolymer grouting materials and to study the unclear mechanism of the influence factors on the fluidity and mechanical properties of geopolymer; the research on the mechanical properties of fly ash-slag based geopolymer was carried out in this paper. Experiments on the preparation of geopolymer and research on different ash-slag ratios under solid alkali excitation were studied. The influence of slag content and solid alkali content (NaOH, Na2SiO3) on the fluidity, compressive and flexural strength of fly ash-slag-based grouting materials was also researched on the basis of single-factor gradient tests. The results showed that the slurry fluidity decreased but the compressive strength gradually increased when the content of slag was increased from 20% to 50%. With the increase in alkali content (NaOH: 2–5%; sodium silicate: 0–6%), the slurry fluidity decreased and the compressive strength increased and then decreased. Combined with the analysis of the test results of Scanning Electron Microscopy (SEM), the microscopic structures of mechanical properties of geopolymer were investigated. Lastly based on ridge regression theory, a regression model was established to predict the mechanical properties of fly ash-slag-based geopolymer. The results indicate that fly ash-slag-based geopolymer has good mechanical properties and fluidity with proper contents of slag and alkali activator, which provide a reference for experiment research and engineering application.

Properties of geopolymer based on fly ash

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Study of Manufacture Process and Properties of Fly Ash-Based Geopolymers

Effect of Fine Aggregate Particle Characteristics on Mechanical Properties of Fly Ash-Based Geopolymer Mortar

Physico-chemical properties and durability of a fly-ash-based geopolymer

Solidification of (Pb–Zn) mine tailings by fly ash-based geopolymer I: influence of alkali reagents ratio and curing condition on compressive strength

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

Factors affecting the property of open-cell fly ash-based porous geopolymer via replica method

Microstructure, Compressive Strength and Sound Insulation Property of Fly Ash-Based Geopolymeric Foams with Silica Fume as Foaming Agent

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

Effects of Steel Slag on Mechanical Properties and Mechanism of Fly Ash–Based Geopolymer

Feasibility analysis of the preparation of geopolymers from different types of coal based ash: Reaction, synthesis, and properties

Study of In Situ Foamed Fly Ash Geopolymer

Experimental study on full-volume fly ash geopolymer mortars: Sintered fly ash versus sand as fine aggregates

The Influence of Α-Al2o3 Addition on Microstructure, Mechanical and Formaldehyde Adsorption Properties of Fly Ash-Based Geopolymer Products

Utilization of Calcium Carbide Residue as Solid Alkali for Preparing Fly Ash-Based Geopolymers: Dependence of Compressive Strength and Microstructure on Calcium Carbide Residue, Water Content and Curing Temperature

Mechanical Properties of Fly Ash-Slag Based Geopolymer for Repair of Road Subgrade Diseases

Influence of Activators on Mechanical Properties of Modified Fly Ash Based Geopolymer Mortars