Abstract:Abstract Due to the environmental problems linked to the production of portland cement, the search for new more economic and non-polluting construction materials has become a current issue of interest. Geopolymers represent new types of “polymeric” materials of mineral nature. The aim of this work is to study the influence of the Na 2 SiO 3 /NaOH mass ratio and curing time on the mechanical and microstructural properties of fly-ash-based geopolymers GP-Fs. The samples were synthesized with different Na 2 SiO 3 /NaOH mass ratios (2.5, 4, and 6) and curing times (2, 12, and 24 h) at 60°C. The GP-F pastes elaborated were analyzed by scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). The sample with the highest compressive strength and density and the lowest water absorption was produced with a Na 2 SiO 3 /NaOH mass ratio of 2.5 and a curing time of 24 h, which is GP1, as confirmed by FTIR and XRD analyses; in addition, it had a compact structure attributed to a higher pozzolanic reactivity. These optimized geopolymer pastes were studied to assess the durability test, evaluating the resistance to fire and acid attack. Fire resistance was assessed by heating the GP-F pastes to 800°C for 2 h, and acid resistance was studied by immersing specimens in a solution of 6% acetic acid (GP-F-CH 3 COOH) and 6% hydrochloric acid (GP-F-HCl) for 2 months. Physico-chemical and microstructural changes before and after heat and acid exposure were studied using several analyses. Samples exposed to an acidic environment display a completely porous shape with some micro-cracks, inducing a decrease of the residual compressive energy. FTIR analysis showed that the geopolymer gel deformed after heating to 800°C, and pores were formed in their structure due to evaporation of water.

Study of Manufacture Process and Properties of Fly Ash-Based Geopolymers

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Properties of geopolymer based on fly ash

Physico-chemical properties and durability of a fly-ash-based geopolymer

Mechanical Properties of Geopolymers Synthesized from Fly Ash and Red Mud under Ambient Conditions

Feasibility analysis of the preparation of geopolymers from different types of coal based ash: Reaction, synthesis, and properties

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Factors affecting the property of open-cell fly ash-based porous geopolymer via replica method

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

Study the Mechanical Properties of Geopolymer under Different Curing Conditions

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

Synthesis Factors Affecting Mechanical Properties, Microstructure, and Chemical Composition of Red Mud–fly Ash Based Geopolymers

Solidification of (Pb–Zn) mine tailings by fly ash-based geopolymer I: influence of alkali reagents ratio and curing condition on compressive strength

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Study of In Situ Foamed Fly Ash Geopolymer

Fly Ash-Based Geopolymer Building Materials for Green and Sustainable Development

A high-strength red mud–fly ash geopolymer and the implications of curing temperature

Modeling and optimization of fly ash–slag-based geopolymer using response surface method and its application in soft soil stabilization

Effect of Waste Glass Powder and Bamboo Fiber on the Physico-Mechanical Properties and High-Temperature Behavior of a Fly Ash-Based Geopolymer