Abstract:In this work we studied the fabrication of a monolithic bimaterial micro-cantilever resonant IR. sensor with on-chip drive circuits. The effects of high temperature process and stress induced performance degradation were investigated. The post-CMOS MEMS (micro electro mechanical system) fabrication process of this IR. sensor is the focus of this paper, starting from theoretical analysis and simulation, and then moving to experimental verification. The capacitive cantilever structure was fabricated by surface micromachining method, and drive circuits were prepared by standard CMOS process. While the stress introduced by MEMS films, such as the tensile silicon nitride which works as a contact etch stopper layer for MOSFETs and releasing stop layer for the MEMS structure, increases the electron mobility of NMOS, PMOS hole mobility decreases. Moreover, the NMOS threshold voltage(Vth) shifts, and transconductance (Gm) degrades. An additional step of selective removing silicon nitride capping layer and polysilicon layer upon IC area were inserted into the standard CMOS process to lower the stress in MOSFET channel regions. Selective removing silicon nitride and polysilicon before annealing can void 77% Vth shift and 86% Gm loss.

Uncooled bimaterial cantilever for infrared detection based on resonant frequency tracking

Bimaterial infrared imaging sensor array with electronic resonance frequency readout

Bi-Material Resonant Infrared Thermal Detector And Array

Mid-Infrared Sensor Based on a Suspended Microracetrack Resonator With Lateral Subwavelength-Grating Metamaterial Cladding

Thermal Expansion Mismatch Resonant Infrared Sensor and Array

Suspended Microracetrack Resonator with Lateral Sub-wavelength-Grating Metamaterial Cladding for Mid-infrared Sensing Applications

Bi-material microcantilever array room-temperature IR imaging

An uncooled optically readable infrared imaging detector

Uncooled Optically Readable Bimaterial Micro-Cantilever Infrared Imaging Device

Uncooled Infrared Detection Using CMOS Thermomechanical Capacitive Sensors

Sensitive Birefringent Temperature Sensor Based on a Waveguide Ring Resonator.

Bimaterial micro-cantilever uncooled infrared imaging system-design and fabrication of micro-cantilever array

Development Of Infrared Fpa Using Bimaterial Microcantilever Arrays

Bimaterial Cantilever Focal Plane Array for Uncooled Infrared Imaging Using Sandwich-Framed Structure

Uncooled Multi-Band IR Imaging Using Bimaterial Cantilever FPA

A New Structure of Cantilever-Based Infrared Focal-Plane Array

Fabrication of monolithic integrated bimaterial resonant uncooled IR sensor

A novel uncooled substrate-free optical-readable infrared detector: design, fabrication and performance

Research on Frequency Measurement of the Uncooled Infrared MEMS Resonance Sensor

A Novel Opto-Mechanical Uncooled Infrared Detector

Optimized Optomechanical Micro-Cantilever Array for Uncooled Infrared Imaging