Abstract:InSb is an important semiconductor material in the field of optoelectronic devices due to its high electron and hole mobility, low effective mass, and low energy gap at room temperature. In this paper, a thermally controlled dual-band terahertz metamaterial absorber with a patterned InSb film is designed and studied. The unit cell of the proposed metamaterial is composed of combined InSb double rectangular ring resonators (DRRR) adhered on a continuous gold layer and substrate. Finite-difference-time-domain (FDTD) simulation results demonstrate that the absorption peak can reach 98.95 %, and 99.45 % at 1.499 THz and 1.592 THz when the external environment temperature is 283 K. Electric field distribution and parameter sweep indicate the two absorption peaks result from the near-field coupled linear superposition between the big square and small square resonators. The proposed absorber not only has the features of wide incident-angle stability, but also polarization insensitivity. Besides, the proposed absorber shows temperature-tunable features due to the temperature-dependent variation of the permittivity of InSb material. The InSb pattern proposed in this paper provides an alternative method for designing of dual parameters sensor in the terahertz band, the proposed dual-band absorber can function as a temperature sensor with sensitivities of about 8.6 GHz/K and 12.8 GHz/K, respectively. The proposed dual-band absorber can also be used as a refractive index sensor with sensitivities of about 1.065 THz /RIU, and 0.499 THz /RIU, respectively. Therefore, the present work provides an effective method for implementing thermally and refractive index sensors in the terahertz range.

Thermal Expansion Mismatch Resonant Infrared Sensor and Array

Bi-Material Resonant Infrared Thermal Detector And Array

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Thermo-Optical Tuning Cascaded Double Ring Sensor With Large Measurement Range

Optical Sensors Based on Cascaded Micro-Ring Resonators with Thermo-Optical Tuning

Bimaterial infrared imaging sensor array with electronic resonance frequency readout

Uncooled bimaterial cantilever for infrared detection based on resonant frequency tracking

Thermal-optic Tuning Cascaded Double Ring Optical Sensor Based on Wavelength Interrogation

Highly-sensitive Optical Sensor Using Two Cascaded-Microring Resonators with Vernier Effect

High-sensitivity Optical Sensors Based on Cascaded Reflective MZIs and Microring Resonators

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Sensitive Birefringent Temperature Sensor Based on a Waveguide Ring Resonator.

Temperature-insensitive Optical Sensors Based on Two Cascaded Identical Microring Resonators

A dynamic thermal sensing mechanism with reconfigurable expanded-plane structures

Analysis of Driving Force and Exciting Voltage for a Bi-Material Infrared Resonator

Novel High Thermal Resistance Structure Design for Responsivity and Detectivity Enhancements of Cmos Mems Thermoelectric Infrared Sensor

Temperature and refractive index sensor based on perfect absorber in InSb double rectangular ring resonator metamaterials

Performance Enhance of CMOS-MEMS Thermoelectric Infrared Sensor by Using Sensing Material and Structure Design

Highly Sensitive Temperature Sensor Based on Coupled-Beam MN-on-Si MEMS Resonators Operating in Out-of-Plane Flexural Vibration Modes

Highly Sensitive Athermal Optical Microring Sensor Based on Intensity Detection