Abstract:The optomechanical uncooled infrared (IR) detector, characterized by a straightforward manufacturing process and sensitivity comparable to photonic detectors, employs bi-material microcantilevers as individual pixels. The detector’s key performance parameters are thermomechanical sensitivity and time constant, which are directly proportional to the coefficient of thermal expansion (CTE) mismatch and thermal mass of the two materials. Carbon nanotubes (CNTs), which exhibit thermal contraction axially, have a CTE value of $-$ $11~\times~10$ $^{-6}$ K $^{-1}$ around room temperature. When combined with metals, such as gold, which have a positive CTE, it is possible to create bi-material pixels with superior thermomechanical sensitivity. The low thermal mass nature of CNTs inherently endows the pixels with a rapid thermal response. To realize an optomechanical IR detector based on super-aligned CNTs, a microfabrication process was developed that incorporates a liquid-induced CNT self-assembled step. Theoretical analyses indicate that the thermomechanical sensitivity and response speed are doubled compared to traditional ceramic-metal based photomechanical uncooled IR detectors. The experimental results are in good agreement with the theoretical values, demonstrating a measured time constant and thermomechanical sensitivity of 62 ms and 0.466 $\mu $ m/K, respectively. This design offers a viable path towards the development of high-performance uncooled IR detectors, facilitated by the integration of super-aligned CNTs. 2024-0011

Uncooled Infrared Detection Using CMOS Thermomechanical Capacitive Sensors

CMOS Micromachined Infrared Imager Pixel

Performance Enhance of CMOS-MEMS Thermoelectric Infrared Sensor by Using Sensing Material and Structure Design

Design and thermodynamic analysis on capacitive uncooled IR detector

Fabrication of monolithic integrated bimaterial resonant uncooled IR sensor

Novel High Thermal Resistance Structure Design for Responsivity and Detectivity Enhancements of Cmos Mems Thermoelectric Infrared Sensor

Detectivity Enhancement for CMOS-MEMS IR Sensor by Thermocouple Arrangement

High Sensitivity and Rapid Response Optomechanical Uncooled Infrared Detector from Self-Assembled Super-Aligned Carbon Nanotubes Film

Uncooled Optically Readable Bimaterial Micro-Cantilever Infrared Imaging Device

MEMS Based Optomechanical Infrared Imaging

Smart CMOS mid-infrared sensor array

Non-Imaging Digital CMOS-SOI-MEMS Uncooled Passive Infra-Red Sensing Systems

PERIODIC CAVITIES ON THE IR-ABSORBER FOR RESPONSIVITY ENHANCEMENT OF CMOS-MEMS THERMOELECTRIC IR SENSOR

Novel Absorber Membrane and Thermocouple Designs for CMOS-MEMS Thermoelectric Infrared Sensor

A Novel Infrared Sensor Structure Compatible to Standard CMOS Process

Uncooled IR imaging using optomechanical detectors

A Novel Opto-Mechanical Uncooled Infrared Detector

An uncooled optically readable infrared imaging detector

Design of Micromechanical Thermopile Infrared Detector Compatible with CMOS Process

An Uncooled Microcantilever IR Detector Based on Bulk Silicon Technique

CMOS MEMS Thermoelectric Infrared Sensor With Plasmonic Metamaterial Absorber for Selective Wavelength Absorption and Responsivity Enhancement