Abstract:Infrared detection signifies crucial and indispensable applications in numerous scenarios. Focal plane arrays (FPAs), the most vital devices in an infrared measurement system, are hindered by the incompatibility of the complementary metal oxide semiconductor (CMOS) integrated circuits and the photodetector fabrication process. In this report, a modified read-out circuit controlled by a microcontroller unit (MCU) is designed and fabricated to obtain signal outputs of FPA pixels using the multiplexing structure. The topological configuration of the connection between FPAs and the read-out circuit is explored, in addition, the principle of inter-pixel interference is elaborated. Feedback is delicately constructed in the modified read-out circuit to minimize the interference, which is overlooked in the previous work. To clarify the practical application of the modified read-out circuit, a PbSe FPA is prepared with microfabrication technologies and used to obtain 2-D mid-infrared (MIR) images of a heated target in real-time. The imaging results show apparent enhancement in contrast as we expect, which means that the inter-pixel interference is effectively reduced with our modified circuit. Thus, a good capability of anti-noise shows up in our photodetection measurement system, resulting in higher image quality. The modified read-out circuit can be further used in measurements comprised of various small-scale FPA chips with low fabrication costs.

Smart CMOS mid-infrared sensor array

A High-resolution Colloidal Quantum Dot Imager by Monolithic Integration

A CMOS Integrated W-band Passive Imager

Design Realization and Characterization of A Position Sensitive Detector for Fast Optical Measurement

Uncooled low-cost thermal imager based on micromachined CMOS integrated sensor array

Non-Imaging Digital CMOS-SOI-MEMS Uncooled Passive Infra-Red Sensing Systems

A Thermopile Infrared Sensor Array Pixel Monolithically Integrated with an NMOS Switch

Si-Cmos Compatible Materials and Devices for Mid-Ir Microphotonics

Imaging of the Mid-Infrared Focal Plane Array with a Modified Read-Out Circuit.

MEMS Based Optomechanical Infrared Imaging

Optical Temperature Sensor Based on Polysilicon Waveguides

Uncooled Infrared Detection Using CMOS Thermomechanical Capacitive Sensors

Thin-Film Quantum Dot Photodiode for Monolithic Infrared Image Sensors

Linear array of charge sensitive infrared phototransistors for long wavelength infrared detection

Image sensors for low cost infrared imaging and 3D sensing

A CMOS Compatible Pyroelectric Mid-Infrared Detector Based on Aluminium Nitride

An Uncooled Microcantilever IR Detector Based on Bulk Silicon Technique

CMOS Micromachined Infrared Imager Pixel

Ir Imaging At Room-Temperature Using Substrate-Free Micro-Cantilever Array

Wafer-Scale Fabrication of CMOS-Compatible Trapping-Mode Infrared Imagers with Colloidal Quantum Dots

On-chip lateral Si:Te PIN photodiodes for room-temperature detection in the telecom optical wavelength bands