Abstract:Detection of infrared (IR) photons in a room-temperature IR camera is carried out by a two-dimensional array of microbolometer pixels which exhibit temperature-sensitive resistivity. When IR light coming from the far-field is focused onto this array, microbolometer pixels are heated up in proportion to the temperatures of the far-field objects. The resulting resistivity change of each pixel is measured via on-chip electronic readout circuit followed by analog to digital (A/D) conversion, image processing, and presentation of the final IR image on a separate information display screen. In this work, we introduce a new nanophotonic detector as a minimalist alternative to microbolometer such that the final IR image can be presented without using the components required for A/D conversion, image processing and display. In our design, the detector array is illuminated with visible laser light and the reflected light itself carries the IR image which can be directly viewed. We realize and numerically demonstrate this functionality using a resonant waveguide grating structure made of typical materials such as silicon carbide, silicon nitride, and silica for which lithography techniques are well-developed. We clarify the requirements to tackle the issues of fabrication nonuniformities and temperature drifts in the detector array. We envision a potential near-eye display device for IR vision based on timely use of diffractive optical waveguides in augmented reality headsets and tunable visible laser sources. Our work indicates a way to achieve direct thermal IR vision for suitable use cases with lower cost, smaller form factor, and reduced power consumption compared to the existing thermal IR cameras.

Ir Imaging At Room-Temperature Using Substrate-Free Micro-Cantilever Array

A novel uncooled substrate-free optical-readable infrared detector: design, fabrication and performance

A High-resolution Colloidal Quantum Dot Imager by Monolithic Integration

Bi-material microcantilever array room-temperature IR imaging

A Novel Opto-Mechanical Uncooled Infrared Detector

Uncooled IR imaging using optomechanical detectors

An Uncooled Microcantilever IR Detector Based on Bulk Silicon Technique

Uncooled Optically Readable Bimaterial Micro-Cantilever Infrared Imaging Device

An uncooled optically readable infrared imaging detector

An Optical Readout Method Based Uncooled Infrared Imaging System

Uncooled Infrared Imaging Using a Substrate-Free Focal-Plane Array

Ir Imaging Using A Cantilever-Based Focal Plane Array Fabricated By Deep Reactive Ion Etching Technique

MEMS Based Optomechanical Infrared Imaging

Advance in Optically Readable Uncooled Infrared Imaging

Sensing Infrared Photons at Room Temperature: from Bulk Materials to Atomic Layers

A Novel MEMS-based Focal Plane Array for Infrared Imaging

Optimized Optomechanical Micro-Cantilever Array for Uncooled Infrared Imaging

Direct thermal infrared vision via nanophotonic detector design

Nanophotonic detector array to enable direct thermal infrared vision.

Bimaterial micro-cantilever uncooled infrared imaging system-design and fabrication of micro-cantilever array

Design And Fabrication Of A High Sensitivity Focal Plane Array For Uncooled Ir Imaging