Abstract:Reference voltage/current generation is essential to the Analog circuit design. There have been several ways to generate quality reference voltage using bandgap reference (BGR) and there are mainly two types: current mode and voltage mode. The current-mode bandgap reference (CBGR) is widely accepted in industry due to having an output voltage which is below 1 V. However, its drawbacks include a lack of proportional to absolute temperature (PTAT) current availability, a large silicon area, multiple operating points, and a large temperature coefficient (TC). In this paper, various operating points are explained in detail with diagrams. Similar to the conventional voltage mode bandgap reference (VBGR) circuits, modifications of the existing circuits with only two operating points have also been proposed. Moreover, the proposed BGR occupies a much smaller area due to eliminating the complimentary to absolute temperature (CTAT) current-generating resistor. A new self-biased opamp was introduced to operate from a 1.05 V supply, reducing systematic offset and TC of the BGR. The proposed solution has been implemented in 28 nm CMOS TSMC technology, and extraction simulations were performed to prove the robustness of the proposed circuit. The targeted mean BGR output is 500 mV, and across the industrial temperature range (−40 to 125 °C), the simulated TC is approximately 10.5 ppm/°C. The integrated output noise within the observable frequency band is 19.6 μV (rms). A 200-point Monte Carlo simulation displays a histogram with a 2.6 mV accuracy of 1.2% (±3-sigma). The proposed BGR circuit consumes 32.8 μW of power from a 1.05 V supply in a fast process and hot (125 °C) corner. It occupies a silicon area of 81 × 42 μm (including capacitors). This design can aim for use in biomedical and sensor applications.

A Resistorless Cmos Bandgap Reference with Low Temperature Coefficient and High Psrr

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A Resistorless High-Precision Compensated CMOS Bandgap Voltage Reference.

A 0.9-V high-PSRR bandgap with self-cascode current mirror

A 1.74 Ppm/&#x00b0;c, High PSRR Bandgap Reference with Fast Start-Up

A 3.2ppm/°C curvature-compensated bandgap reference with wide supply voltage range

A 0.19 Ppm/Degrees C Bandgap Reference Circuit With High-Psrr

A 0.19 ppm/°C bandgap reference circuit with high-PSRR

A Temperature-Compensated Voltage Reference with High PSRR

A low-power NPN-based band-gap voltage reference in an ultra-wide temperature range

A Piecewise Curvature-Corrected CMOS Bandgap Reference with Negative Feedback

A Novel Piecewise Curvature-Corrected CMOS Bandgap Reference

A High-Precision Resistor-Less CMOS Compensated Bandgap Reference Based on Successive Voltage-Step Compensation

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A High Precision Bandgap Voltage Reference with MOS Transistor Curvature Compensation in 65-Nm CMOS Process

A High-PSRR CMOS Bandgap Reference Without Resistor

A 1.6-V 17-Mu A 5.2-Ppm/Degrees C Bandgap Reference With Mutative Curvature-Compensation

A 1-V Piecewise Curvature-Corrected CMOS Bandgap Reference

A 10.5 ppm/°C Modified Sub-1 V Bandgap in 28 nm CMOS Technology with Only Two Operating Points

A 3v 110uw 3.1ppm/Degrees C Curvature-Compensated Cmos Bandgap Reference