Abstract:Reference voltage/current generation is essential to the Analog circuit design. There have been several ways to generate quality reference voltage using bandgap reference (BGR) and there are mainly two types: current mode and voltage mode. The current-mode bandgap reference (CBGR) is widely accepted in industry due to having an output voltage which is below 1 V. However, its drawbacks include a lack of proportional to absolute temperature (PTAT) current availability, a large silicon area, multiple operating points, and a large temperature coefficient (TC). In this paper, various operating points are explained in detail with diagrams. Similar to the conventional voltage mode bandgap reference (VBGR) circuits, modifications of the existing circuits with only two operating points have also been proposed. Moreover, the proposed BGR occupies a much smaller area due to eliminating the complimentary to absolute temperature (CTAT) current-generating resistor. A new self-biased opamp was introduced to operate from a 1.05 V supply, reducing systematic offset and TC of the BGR. The proposed solution has been implemented in 28 nm CMOS TSMC technology, and extraction simulations were performed to prove the robustness of the proposed circuit. The targeted mean BGR output is 500 mV, and across the industrial temperature range (−40 to 125 °C), the simulated TC is approximately 10.5 ppm/°C. The integrated output noise within the observable frequency band is 19.6 μV (rms). A 200-point Monte Carlo simulation displays a histogram with a 2.6 mV accuracy of 1.2% (±3-sigma). The proposed BGR circuit consumes 32.8 μW of power from a 1.05 V supply in a fast process and hot (125 °C) corner. It occupies a silicon area of 81 × 42 μm (including capacitors). This design can aim for use in biomedical and sensor applications.

A New Bandgap Reference for High-Resolution Data Converters

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A High Precision Circuit of Bandgap Voltage Reference

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

Super Performance CMOS Band-Gap Voltage Reference

A 14-B BW /power Scalable Sensor Interface with a Dynamic Bandgap Reference

A 0.9-V high-PSRR bandgap with self-cascode current mirror

A High Accuracy and Configurable Voltage (1.2/1.8/2.5/3.3 V) Bandgap Reference with Base Current Compensation for DC–DC Converters

A High Precision Bandgap Voltage Reference with MOS Transistor Curvature Compensation in 65-Nm CMOS Process

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A 3v 110uw 3.1ppm/Degrees C Curvature-Compensated Cmos Bandgap Reference

A 10.5 ppm/°C Modified Sub-1 V Bandgap in 28 nm CMOS Technology with Only Two Operating Points

A Sub-1ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation

A3V 110uW 3.1ppm/°C curvature-compensated CMOS bandgap reference

A Novel High-Precision Bandgap Reference with Differential Common-Gate Structure

A 0.885ppm/°C digitally calibrated bandgap voltage reference with robust start-up circuit

A 2.25 ppm/°C High-Order Temperature-Segmented Compensation Bandgap Reference

A Curvature-Compensated CMOS Bandgap with Negative Feedback Technique