Effect of embedded periodic fiber placement gap defects on the microstructure and bistable behavior of thermoplastic composite laminates
Yonglong Ma,Zheng Zhang,Sheng Wang,Baisong Pan,Min Sun,Guang Zhang,Hao Chai,Huaping Wu,Shaofei Jiang
DOI: https://doi.org/10.1002/pc.27753
IF: 5.2
2023-09-23
Polymer Composites
Abstract:Automated fiber placement periodic gaps were embedded in thermoplastic bistable composite laminates, and the effect on the principal curvature and load‐displacement has been studied in this paper. Under SEM microscopy, the gaps were filled with polymer to make the resin‐rich areas in the laminates with 0.5 mm gaps and only partially healed in the laminates with 1.6 and 3.2 mm gaps, which caused the thickness of the bistable laminates to decrease. A simplified numerical model was developed to investigate the effect of gap width and thickness of laminates on the mechanical performance of the specimens. As the gap width increases, the snap load of the snap‐through increases and has a higher load bearing capacity, whereas the snap load of the snap‐back decreases and necessitates less energy input to generate a snap process, which makes the application of bistable structures more favorable. Therefore, when manufacturing bistable composite structures with the AFP process is unable to eliminate gap defects, we can utilize this interesting phenomenon of periodic gaps embedding in the 0° layer to control the mechanical properties of bistable laminates. By inducing periodic gaps, conventional automated fiber placement avoids overlap defects, which are generally prohibited in composite component manufacturing. However, bistable laminates are highly sensitive to imperfections, and it is critical to explore the effect of periodic gaps on the performance of bistable laminates. The principal curvatures and load–displacement curves of thermoplastic composite laminates with manually embedded periodic gaps was studied using experimental and numerical methods in this paper. SEM microscopy was used to observe the gap areas of the cross section of laminates to assess the microstructure of gaps with width variations after curing. In addition, a numerical method was proposed based on the experimentally determined evolution of gap widths and thicknesses of laminate. Subsequently, the effects of gap width, single‐layer thickness, and total thickness on the principal curvature were investigated. Gaps embedded in the 0° and 90° layers of bistable laminates demonstrated a substantial decrease in the snap load of the laminates. Interestingly, by embedding different gap widths in the 0° layers of the laminates, the snap load discrepancy between the snap‐through and snap‐back processes increased as the gap width widened, and the same trend was also found in the curvatures in the two stable states. Highlights Bistable characteristics of laminates with periodic gap defects. Utilizing gaps embedding in 0° layer to tailor the mechanical properties.
materials science, composites,polymer science