Abstract:Lattice structures, characterized by their lightweight nature, high specific mechanical properties, and high design flexibility, have found widespread applications in fields such as aerospace and automotive engineering. However, the lightweight design of lattice structures often presents a trade-off between strength and stiffness. To tackle this issue, a bio-inspired curved-elliptical (BCE) lattice is proposed to enhance the mechanical performance and deformation stability of three-dimensional lattice structures. BCE lattice specimens with different parameters were fabricated using selective laser melting (SLM) technology, followed by quasi-static compression tests. Finite element (FE) numerical simulations were also carried out for validation. The results demonstrate that the proposed BCE lattice structures exhibit stronger mechanical performance and more stable deformation modes that can be adjusted through parameter tuning. Specifically, by adjusting the design parameters, the BCE lattice structure can exhibit a bending-dominated delocalized deformation mode, avoiding catastrophic collapse during deformation. The specific energy absorption (SEA) can reach 24.6 J/g at a relative density of only 8%, with enhancements of 48.5% and 297.6% compared with the traditional energy-absorbing lattices Octet and body-center cubic (BCC), respectively. Moreover, the crushing force efficiency (CFE) of the BCE lattice structure surpasses those of Octet and BCC by 34.9% and 15.8%, respectively. Through a parametric study of the influence of the number of peaks N and the curve amplitude A on the compression performance of the BCE lattice structure, the compression deformation mechanism is further analyzed. The results indicate that the curve amplitude A and the number of peaks N have significant impacts on the deformation mode of the BCE lattice. By adjusting the parameters N and A, a structure with a combination of high energy absorption, high stiffness, and strong fracture resistance can be obtained, integrating the advantages of tensile-dominated and bending-dominated lattice structures.

Study on a New Concept of Multi-Stable Lattice Structure

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

A multi-stable lattice structure and its snap-through behavior among multiple states

Design and analysis of a tri-stable structure based on bi-stable laminates

Snap-through of Bi-Stable Rectangular Unsymmetric Cross-Ply Composite Laminates

Numerical and Experimental Study on Morphing Bi-Stable Composite Laminates Actuated by A Heating Method

Multistable Morphing Structures Integrated with Non-Symmetric/Antisymmetric-Layup Connected Laminates

Prediction of Critical Center Load for Bi-Stable Laminates

Mechanical Behavior of a Novel Lattice Structure with Two-Step Deformation

Mechanical behaviour of a novel lattice structure with two-step deformation

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

A seven-parameter high-order finite element model for multi-stable analysis of variable stiffness laminated shells

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting

Bio-Inspired Curved-Elliptical Lattice Structures for Enhanced Mechanical Performance and Deformation Stability

Design and Analysis of Multistable Curvilinear-fiber Laminates Based on Continuous Fiber 3D Printing of Thermosetting Resin Matrix

Optimization and Compressive Behavior of Composite 2-D Lattice Structure

Stiffness Design of a Multilayer Arbitrary BCC Lattice Structure with Face Sheets

Design and Manufacturing of a Composite Lattice Structure Reinforced by Continuous Carbon Fibers

Study of Dynamic Brittle Fracture of Composite Lamina Using a Bond-Based Peridynamic Lattice Model

Numerical analysis of the mechanical behavior and energy absorption of a novel P-lattice

A computational framework for multi-stability analysis of laminated shells