Abstract:A regular DRAM cell is designed based on Transition metal dichalcogenide FETs (TMDFET) devices. Monte Carlo simulations are performed to study different performance metrics such as bitline recovery time, merge time, sense time and power consumption. Simulations have been carried out in HSPICE with 16 nm technology. Transition metal dichalcogenide field‐effect transistors (TMDFETs) as a replacement for conventional metal–oxide–semiconductor field‐effect transistors (MOSFETs) have attracted the attention of researchers in recent years. The efficiency of these devices should be investigated in different aspects in digital systems. One of the important components of such systems is dynamic random‐access memory (DRAM), which is used in most computers and many electronic systems as the main memory due to its small area and simple structure, compared to static memory (SRAM) cells. In this paper, a regular DRAM cell is designed based on TMDFET devices and its performance is compared with a similar cell in conventional MOSFET technology from various aspects, including DRAM‐specific timing characteristics considering changes in design and environmental parameter variations using Monte Carlo simulations. The simulations have been carried out in HSPICE with 16 nm technology under fair conditions for different technologies, at room temperature with a 0.7‐V power supply. The results show that the TMD‐DRAM has 3.55×, 3.08×, and 2.23× faster bitline recovery, merge time, and sense time than Si‐MOS‐DRAM, respectively. The Si‐MOS‐DRAM, on the other hand, has 1.65× faster write time compared to TMD‐DRAM. However, TMD‐DRAM consumes overall higher power than Si‐MOS‐DRAM, and shows higher average read power variability with the σ/μ = 0.476. The TMD‐DRAM also shows higher variability in the studied timing characteristics than Si‐MOS‐DRAM except merge and sense times.

A Novel 1T-1D DRAM Cell for Embedded Application

Design of a Novel High Speed Embedded DRAM

Design of a Novel One Transistor-Dram Based on Bulk Silicon Substrate

A Novel 1T-DRAM Fabricated with 22 nm FD-SOI Technology

A Novel Capacitorless 1T DRAM with Embedded Oxide Layer

A Novel Self-Refreshable Capacitorless DRAM Cell and Its Extended Applications

Novel 2T gain cell with enhanced retention time for embedded DRAM application

A Novel Interface Trap 1T0C In-Ga-Zn Oxide DRAM Cell with Enhanced Data Retention

A Novel CMOS FEOL-Embedded Asymmetrical FET for Capacitor-less and Long-Retention DRAM Based on 300mm Logic Foundry Platform

A Semi-Floating Gate Memory Based on SOI Substrate by TCAD Simulation

Disturbance Characteristics of 1T DRAM Arrays Consisting of Feedback Field-Effect Transistors

A Semi-Floating Gate Memory with Tensile Stress for Enhanced Performance

Polycrystalline-Silicon-MOSFET-Based Capacitorless DRAM With Grain Boundaries and Its Performances

Novel SONOS and Floating-Gate Flash Memory Cell Structures for High Density and High Reliability Applications

Nanoelectromechanical DRAM for Ultra-Large-scale Integration (ULSI)

High Performance 2T0C DRAM Cells Based on Atomic-Layer-deposited InAlZnO FETs

A 2T Dual Port Capacitor-Less DRAM

A Novel Dual-Doping Floating-Gate (ddfg) Flash Memory Featuring Low Power and High Reliability Application

Novel Silicon-Based Flash Cell Structures for Low Power and High Density Memory Applications

The Programming Optimization of Capacitorless 1T DRAM Based on the Dual-Gate TFET

Transition metal dichalcogenide FET‐based dynamic random‐access memory