Abstract:A regular DRAM cell is designed based on Transition metal dichalcogenide FETs (TMDFET) devices. Monte Carlo simulations are performed to study different performance metrics such as bitline recovery time, merge time, sense time and power consumption. Simulations have been carried out in HSPICE with 16 nm technology. Transition metal dichalcogenide field‐effect transistors (TMDFETs) as a replacement for conventional metal–oxide–semiconductor field‐effect transistors (MOSFETs) have attracted the attention of researchers in recent years. The efficiency of these devices should be investigated in different aspects in digital systems. One of the important components of such systems is dynamic random‐access memory (DRAM), which is used in most computers and many electronic systems as the main memory due to its small area and simple structure, compared to static memory (SRAM) cells. In this paper, a regular DRAM cell is designed based on TMDFET devices and its performance is compared with a similar cell in conventional MOSFET technology from various aspects, including DRAM‐specific timing characteristics considering changes in design and environmental parameter variations using Monte Carlo simulations. The simulations have been carried out in HSPICE with 16 nm technology under fair conditions for different technologies, at room temperature with a 0.7‐V power supply. The results show that the TMD‐DRAM has 3.55×, 3.08×, and 2.23× faster bitline recovery, merge time, and sense time than Si‐MOS‐DRAM, respectively. The Si‐MOS‐DRAM, on the other hand, has 1.65× faster write time compared to TMD‐DRAM. However, TMD‐DRAM consumes overall higher power than Si‐MOS‐DRAM, and shows higher average read power variability with the σ/μ = 0.476. The TMD‐DRAM also shows higher variability in the studied timing characteristics than Si‐MOS‐DRAM except merge and sense times.

Transition metal dichalcogenide FET‐based dynamic random‐access memory

Projected performance of Si- and 2D-material-based SRAM circuits ranging from 16 nm to 1 nm technology nodes

High Performance Si-MoS2 Heterogeneous Embedded DRAM

Polycrystalline-Silicon-MOSFET-Based Capacitorless DRAM With Grain Boundaries and Its Performances

2D Materials-Based Static Random-Access Memory

Simulation of capacitorless DRAM based on polycrystalline silicon with a vertical underlap structure and a separated channel layer

A Novel 1T-DRAM Fabricated with 22 nm FD-SOI Technology

3-D stacked polycrystalline-silicon-MOSFET-based capacitorless DRAM with superior immunity to grain-boundary's influence

Design Space Exploration of FeRAM Bit Cell for DRAM Application

The Programming Optimization of Capacitorless 1T DRAM Based on the Dual-Gate TFET

Disturbance Characteristics of 1T DRAM Arrays Consisting of Feedback Field-Effect Transistors

DDR-MRAM: Double Data Rate Magnetic RAM for Efficient Artificial Intelligence and Cache Applications

A high-performance capacitorless 1T-DRAM based on Z-shaped electron-hole bilayer TFET and SiGe memory window

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

High-Performance Logic and Memory Devices Based on a Dual-Gated MoS2 Architecture

A 3-Transistor DRAM Cell with Gated Diode for Enhanced Speed and Retention Time

Analysis of etched drain based Cylindrical agate‐all‐around tunnel field effect transistor based static random access memory cell design

High Performance 2T0C DRAM Cells Based on Atomic-Layer-deposited InAlZnO FETs

First demonstration of 2T0C-FeDRAM: a-ITZO FET and double gate a-ITZO/a-IGZO FeFET with a record-long multibit retention time of >4-bit and >2000 s

Oxide and 2D TMD Semiconductors for 3D DRAM Cell Transistors

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power