Abstract:Thermoelectric energy conversion is an all solid-state technique offering high reliability and power density, desirable properties in mobile waste heat recovery applications. It is generally less efficient than vapor-based thermodynamic cycles. The efficiency of thermoelectric (TE) power generators and heat pumps is characterized by the thermoelectric figure of merit zT = S2σT/κ; here S is the thermopower or Seebeck coefficient of the TE material, κ and σ = 1/ρ are its thermal and electrical conductivities (ρ is the resitivity). Recent research led to a doubling of zT over the last decade. Featuring lattice thermal conductivities intrinsically limited by very strong phonon-phonon interactions to the amorphous limit,[1] small band gaps[2–4] and interesting transport properties,[2,5] some ternary I–V–VI2 intermetallic compounds like AgSbTe2 can reach a thermoelectric figure of merit zT ∼ 1.3 at 400 K[6] when doped p-type. Its alloys with GeTe, called “TAGS”,[7–9] and with PbTe, called “LAST”,[10] are the materials that have some of the highest known zT near 500–800 K, the temperature of automotive exhaust where heat recovery applications are being envisioned. Here we complement the work on AgSbTe2-PbTe and AgSbTe2-GeTe and report the first systematic study of the thermoelectric properties of AgSbTe2SnTe alloys covering the entire alloy range. This goes beyond early work[7,11] concentrated on the SnTe-rich side, and mixed alloys of SnTe, PbTe and AgSbTe2, “LASTT”.[12,13] In large-scale energy recovery applications, SnTe-based alloys would avoid lead-abatement legislation, the technological problems associated with a crystallographic phase transition in GeTe-based alloys, and the very high cost of Ge. The high zT of p-type AgSbTe2 stems from the large density of states (DOS) of the valence band[2] and the intrinsically ultralow thermal conductivity,[1] but it is difficult to dope AgSbTe2 sufficiently to get a good zT. Binary SnTe is plagued by the existence of an irreducible concentration of Sn vacancies which makes it impossible to reach a low hole concentration. Here we

Synthesis and Thermoelectric Properties of Last System Bulk Materials: Substitution of Sulfur for Tellurium

Thermoelectric Performance of AgPb X SbTe 20 ( X = 17 to 23) Bulk Materials Derived from Large-Particle Raw Materials

Fabrication and Property of High-Performance Ag-Pb-Sb-Te System Semiconducting Thermoelectric Materials

High-performance Ag0.8Pb18+xSbTe20 Thermoelectric Bulk Materials Fabricated by Mechanical Alloying and Spark Plasma Sintering

Improvements of Thermoelectric Performances in Agsbte2 System with In-Situ Ag2te Nano-Precipitations

SnTe–AgSbTe2 Thermoelectric Alloys

Composition Optimization of P-Type AgSn M SbTe M +2 Thermoelectric Materials Synthesized by Mechanical Alloying and Spark Plasma Sintering

Thermoelectric enhancement at low temperature in nonstoichiometric lead-telluride compounds

Fine-grained Lead-Free P-Type AgSn 4 SbTe 6 Thermoelectric Materials Synthesized by Mechanical Alloying and Spark Plasma Sintering

Band convergence and nanostructure modulations lead to high thermoelectric performance in SnPb0.04Te-y% AgSbTe2

Powder Metallurgic Synthesis of Mid-Temperature Lead-Free Agsn18sbte20 Thermoelectric Materials and Processing Influence on Thermoelectric Performance

Maximizing Thermoelectric Performance of AgPbmSbTem+2 by Optimizing Spark Plasma Sintering Temperature

Nanostructure and High Thermoelectric Performance in Nonstoichiometric AgPbSbTe Compounds: the Role of Ag

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi0.48Sb1.52Te3-AgSbSe2 Composite.

Identifying polymorphic lattice positioning of copper and the effects on the thermoelectric performance of δ-LAST

Thermoelectric Transport Performance in p-Type AgSbTe 2 -Based Materials through Entropy Engineering

Enhanced Thermoelectric Properties Obtained by Compositional Optimization in P -Type Bi X Sb 2− X Te 3 Fabricated by Mechanical Alloying and Spark Plasma Sintering

Fast Preparation of AgxPb20SbTe20 (x = 0.5–3) Component with High Thermoelectric Performance

Enhanced Thermoelectric and Mechanical Performances in Sintered Bi 0.48 Sb 1.52 Te 3 –AgSbSe 2 Composite

Melt-slow Cooling Synthesis and Thermoelectric Properties of Pb9.6SbmTe3Se7 Alloys

High Pressure Synthesis and Electrical Properties of Ag1-x Pb18 SbTe20