Abstract:Thermoelectric energy conversion is an all solid-state technique offering high reliability and power density, desirable properties in mobile waste heat recovery applications. It is generally less efficient than vapor-based thermodynamic cycles. The efficiency of thermoelectric (TE) power generators and heat pumps is characterized by the thermoelectric figure of merit zT = S2σT/κ; here S is the thermopower or Seebeck coefficient of the TE material, κ and σ = 1/ρ are its thermal and electrical conductivities (ρ is the resitivity). Recent research led to a doubling of zT over the last decade. Featuring lattice thermal conductivities intrinsically limited by very strong phonon-phonon interactions to the amorphous limit,[1] small band gaps[2–4] and interesting transport properties,[2,5] some ternary I–V–VI2 intermetallic compounds like AgSbTe2 can reach a thermoelectric figure of merit zT ∼ 1.3 at 400 K[6] when doped p-type. Its alloys with GeTe, called “TAGS”,[7–9] and with PbTe, called “LAST”,[10] are the materials that have some of the highest known zT near 500–800 K, the temperature of automotive exhaust where heat recovery applications are being envisioned. Here we complement the work on AgSbTe2-PbTe and AgSbTe2-GeTe and report the first systematic study of the thermoelectric properties of AgSbTe2SnTe alloys covering the entire alloy range. This goes beyond early work[7,11] concentrated on the SnTe-rich side, and mixed alloys of SnTe, PbTe and AgSbTe2, “LASTT”.[12,13] In large-scale energy recovery applications, SnTe-based alloys would avoid lead-abatement legislation, the technological problems associated with a crystallographic phase transition in GeTe-based alloys, and the very high cost of Ge. The high zT of p-type AgSbTe2 stems from the large density of states (DOS) of the valence band[2] and the intrinsically ultralow thermal conductivity,[1] but it is difficult to dope AgSbTe2 sufficiently to get a good zT. Binary SnTe is plagued by the existence of an irreducible concentration of Sn vacancies which makes it impossible to reach a low hole concentration. Here we

Thermoelectric Transport Performance in p-Type AgSbTe 2 -Based Materials through Entropy Engineering

Thermoelectric performance of (AgBiTe2)1-x(SnTe)x with stable cubic enabled by enhanced configurational entropy

Enhanced Thermoelectric Performance of Mg-Doped AgSbTe 2 by Inhibiting the Formation of Ag 2 Te

Enhancing Thermoelectric Performance of AgSbTe 2 -Based Compounds via Microstructure Modulation Combining with Entropy Engineering

Non-equilibrium strategy for enhancing thermoelectric properties and improving stability of AgSbTe2

Band convergence and nanostructure modulations lead to high thermoelectric performance in SnPb0.04Te-y% AgSbTe2

SnTe–AgSbTe2 Thermoelectric Alloys

Suppressing Ag2Te Nanoprecipitates for Enhancing Thermoelectric Efficiency of AgSbTe2

Improved Thermoelectric Performance of p-Type PbTe by Entropy Engineering and Temperature-Dependent Precipitates

Enhanced Thermoelectric Performance in High Entropy Alloys Sn0.25Pb0.25Mn0.25Ge0.25Te

Surface Chemistry and Band Engineering in AgSbSe 2 : Toward High Thermoelectric Performance

Transport properties and valence band feature of high-performance (GeTe)85(AgSbTe2)15 thermoelectric materials

Dual Alloying Enables High Thermoelectric Performance in AgSbTe2 by Manipulating Carrier Transport Behavior

Improvement of the thermoelectric properties of GeTe- and SnTe-based semiconductors aided by the engineering based on phase diagram

Entropy Engineered Cubic n‐Type AgBiSe 2 Alloy with High Thermoelectric Performance in Fully Extended Operating Temperature Range

Fast fabrication of SnTe via a non-equilibrium method and enhanced thermoelectric properties by medium-entropy engineering

Enhanced Thermoelectric Performance in High Entropy Alloys Sn 0.25 Pb 0.25 Mn 0.25 Ge 0.25 Te

High-Performance SnTe Thermoelectric Materials Enabled by the Synergy of Band Convergence and Phonon Scattering

Modulated Fermi Level and Relaxed Lattice Strain Leading to Enhanced Thermoelectric Properties in AgSbSe 2

Enhancement on thermoelectric performance by Ti doping and vacancies

Enhancing Thermoelectric Performance in P‐Type Sb 2 Te 3 ‐Based Compounds Through Nb─Ag Co‐Doping with Donor‐Like Effect