Abstract:To reduce significantly the leakage of 4,4',(5')-di-(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6), an improved silica-based polymeric composite, (DtBuCH18C6+TBP)/SiO2-P, was prepared. It was done by impregnating and immobilizing DtBuCH18C6 and tri-n-butyl phosphate (TBP) molecules into the pores of SiO2-P particles through an advanced vacuum sucking technique. The adsorption of 10 typically simulated elements, Ru(III), Pd(II), Ba(II), Mo(VI), La(III), Y(III), Na(I), K(I), Sr(II), and Cs(I), toward (DtBuCH18C6+TBP)/SiO2-P was investigated in the HNO3 concentration range of 0.1-5.0 M. In optimum 2.0 M HNO3 solution, (DtBuCH18C6+TBP)/SiO2-P showed strong adsorption ability and high selectivity for Sr(II) over all of the tested elements. The quantity of total organic carbon (TOC), 281.8 ppm, leaked from (DtBuCH18C6+TBP)/SiO2-P was much lower than that of 532.3 ppm leaked from DtBuCH18C6/SiO2-P. A significant reduction of DtBuCH18C6 leakage was achieved. In terms of the batch experiments, the chromatographic separation of Sr(II) from a 2.0 M HNO3 solution was performed by a (DtBuCH18C6+TBP)/SiO2-P packed column. Na(I), K(I), Cs(I), Pd(II), Mo(VI), La(III), Ru(III), and Y(III) were found to elute facilely and flow into the effluent along with 2.0 M HNO3 because of the weak or no adsorption. Sr(II) and Ba(II) adsorbed strongly and were desorbed sufficiently by distilled water and then separated completely from the others. The recovery percentage was 100.5% for Sr(II) and in the range 99.2-100.6% for the others. The application of the macroporous silica-based (DtBuCH18C6+TBP)/SiO2-P polymeric composite in partitioning of Sr(II) from high level liquid waste (HLLW) is promising.

Dispersion of Si 3N 4 powders in tert-butyl alcohol

Dispersion of Si<sub>3</sub>N<sub>4</sub> Powders in Tert-Butyl Alcohol

Stability Study of Inverse Suspension Copolymerization of 1,1,3,3‐tetramethylguandium Acrylate and N,N′‐methylenebisacrylamide

Preparation of A Novel Silica-Based Dtbuch18c6 Impregnated Polymeric Composite Modified by Tri-N-Butyl Phosphate and Its Application in Chromatographic Partitioning of Strontium from High Level Liquid Waste

Effects of Powder Surface Modification and Amount of Oxide Additives on Rheological Property of Si<sub>3</sub>N<sub>4</sub> Aqueous Suspension

Rheological Properties,dispersibility and Stability of Nano-Sic Based Aqueous Slurry

Effects of Surface Modification by Liquids on Surface Group and Dispersibility of Si3N4 Powder

DISPERSIBILITY MECHANISM AND SPRAY DRYING OF SiC AQUEOUS SLURRY

Influence of powder pre-treatments on dispersion ability of aqueous silicon nitride-based suspensions

Inter-particle interactions of alumina powders in UV-curable suspensions for DLP stereolithography and its effect on rheology, solid loading, and self-leveling behavior

Formation mechanism of stereolithography of Si3N4 slurry using silane coupling agent as modifier and dispersant

Dispersion and co-dispersion of ZrB2 and SiC nanopowders in ethanol

Surface Characteristics and Aqueous Dispersibility of Commercial Silicon Nitride Powders: Effects of Acid Leaching, Surface Hydrolysis, and Thermal Oxidation

Rheological properties and spray-drying behaviors of nano-SiC based aqueous slurry

Dispersion and Functionalization of Nonaqueous Synthesized Zirconia Nanocrystals Via Attachment of Silane Coupling Agents

Functionalized Si3N4 nanoparticles modified with hydrophobic polymer chains by surface-initiated atom transfer radical polymerization (ATRP)

Study of structure–performance relationships of polymeric dispersants on particle dispersion and stabilisation

Effect of Dispersant on the Dispersibility of CaO–Al2O3-Based Mold Powder Slurry

Block copolymers as highly effective dispersant for high solid content SiO2 with wide pH tolerability in aqueous

Homogeneous nanoparticle dispersion prepared with impurity-free dispersant by the ball mill technique

THE STUDY OF THE SLURRY PROPERTIES OF Si_3N_4 FOAM CERAMICS