Abstract:To reduce significantly the leakage of 4,4',(5')-di-(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6), an improved silica-based polymeric composite, (DtBuCH18C6+TBP)/SiO2-P, was prepared. It was done by impregnating and immobilizing DtBuCH18C6 and tri-n-butyl phosphate (TBP) molecules into the pores of SiO2-P particles through an advanced vacuum sucking technique. The adsorption of 10 typically simulated elements, Ru(III), Pd(II), Ba(II), Mo(VI), La(III), Y(III), Na(I), K(I), Sr(II), and Cs(I), toward (DtBuCH18C6+TBP)/SiO2-P was investigated in the HNO3 concentration range of 0.1-5.0 M. In optimum 2.0 M HNO3 solution, (DtBuCH18C6+TBP)/SiO2-P showed strong adsorption ability and high selectivity for Sr(II) over all of the tested elements. The quantity of total organic carbon (TOC), 281.8 ppm, leaked from (DtBuCH18C6+TBP)/SiO2-P was much lower than that of 532.3 ppm leaked from DtBuCH18C6/SiO2-P. A significant reduction of DtBuCH18C6 leakage was achieved. In terms of the batch experiments, the chromatographic separation of Sr(II) from a 2.0 M HNO3 solution was performed by a (DtBuCH18C6+TBP)/SiO2-P packed column. Na(I), K(I), Cs(I), Pd(II), Mo(VI), La(III), Ru(III), and Y(III) were found to elute facilely and flow into the effluent along with 2.0 M HNO3 because of the weak or no adsorption. Sr(II) and Ba(II) adsorbed strongly and were desorbed sufficiently by distilled water and then separated completely from the others. The recovery percentage was 100.5% for Sr(II) and in the range 99.2-100.6% for the others. The application of the macroporous silica-based (DtBuCH18C6+TBP)/SiO2-P polymeric composite in partitioning of Sr(II) from high level liquid waste (HLLW) is promising.

Dispersion of Si<sub>3</sub>N<sub>4</sub> Powders in Tert-Butyl Alcohol

Dispersion of Si 3N 4 powders in tert-butyl alcohol

Stability Study of Inverse Suspension Copolymerization of 1,1,3,3‐tetramethylguandium Acrylate and N,N′‐methylenebisacrylamide

Preparation of A Novel Silica-Based Dtbuch18c6 Impregnated Polymeric Composite Modified by Tri-N-Butyl Phosphate and Its Application in Chromatographic Partitioning of Strontium from High Level Liquid Waste

Effects of Powder Surface Modification and Amount of Oxide Additives on Rheological Property of Si<sub>3</sub>N<sub>4</sub> Aqueous Suspension

Rheological Properties,dispersibility and Stability of Nano-Sic Based Aqueous Slurry

Effects of Surface Modification by Liquids on Surface Group and Dispersibility of Si3N4 Powder

DISPERSIBILITY MECHANISM AND SPRAY DRYING OF SiC AQUEOUS SLURRY

Influence of powder pre-treatments on dispersion ability of aqueous silicon nitride-based suspensions

Surface Characteristics and Aqueous Dispersibility of Commercial Silicon Nitride Powders: Effects of Acid Leaching, Surface Hydrolysis, and Thermal Oxidation

Dispersion and co-dispersion of ZrB2 and SiC nanopowders in ethanol

Formation mechanism of stereolithography of Si3N4 slurry using silane coupling agent as modifier and dispersant

Dispersion Properties of Silicon Nitride Powder Coated with Yttrium and Aluminium Precursors

Rheological properties and spray-drying behaviors of nano-SiC based aqueous slurry

Study on Rheological Behavior of Micro/Nano-Silicon Carbide Particles in Ethanol by Selecting Efficient Dispersants

Surface Characterization of Silicon Nitride Powder and Electrokinetic Behavior of Its Aqueous Suspension

Dispersion and Functionalization of Nonaqueous Synthesized Zirconia Nanocrystals Via Attachment of Silane Coupling Agents

Effects of liquid medium and ball-milling on the surface group and aqueous dispersibility of Si3N4 powder

Direct Coagulation Casting of Silicon Nitride Suspension Via a Dispersant Reaction Method

THE STUDY OF THE SLURRY PROPERTIES OF Si_3N_4 FOAM CERAMICS

Effect of Dispersant on the Dispersibility of CaO–Al2O3-Based Mold Powder Slurry

Dispersion of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Powders in Tert-Butyl Alcohol