Abstract:This article presents a resolution-tunable time-to-digital converter (TDC) with a three-level structure, in which the low-level TDC employs an improved all-digital delay-locked loop (ADDLL) based on a cyclic pulse ring oscillator (CPRO) and a digital controller for detection lock state (DLS). Specifically, a bidirectional bypass transmission delay unit (BBTDU) in CPRO provides adjustable resolution with a 15 ps coarse delay step and a 3.5 ps fine delay step. Second, a data processing approach is presented to open the window to extract a 4-bit binary data of the bidirectional serial shift register line (BSSRL) in ADDLL for DLS and update the values of BSSRL at the same position of windowing, which can reduce the number of manipulated registers in BSSRL by approximately 93.7%. Then, a methodology of detecting the locking pattern between lock and unlock and selecting the fixed optimal windowing sequence to update the controlling values of BSSRL is proposed to eliminate dithering in a locked state, which can reduce the clock phase jitter when locked. Finally, the proposed TDC has been integrated into a system-on-chip (SoC) and fabricated in 65-nm CMOS technology. The measurement results implemented with a 30 MHz reference clock demonstrate that a resolution-tunable TDC with low power has been obtained. There are six configurable resolutions in all. When configured to a minimum resolution of 7.78 ps, the power consumption and the precision are 4.812 mW and 3.02 ps, respectively. While configured for a maximum resolution of 29.7 ps, the power consumption and the precision are 2.874 mW and 13.2 ps, respectively. The proposed TDC is extremely flexible and well-suited for integration into other large-scale application-specific integrated circuit (ASIC) chips to extend the application range, especially for low-frequency applications.

Design and Analysis of a Robust All-Digital Clock Generation System with a DLL-based TDC

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A PVT-insensitive Self-Dithered TDC Design by Utilizing a ΔΣ DLL

A 2.5GHz ADPLL with PVT-insensitive ΔΣ dithered time-to-digital conversion by utilizing an ADDLL.

All‐digital PLL with ΔΣ DLL Embedded TDC

A 2.5ghz Adpll With Pvt-Insensitive Delta Sigma Dithered Time-To-Digital Conversion By Utilizing An Addll

A Low Power Time-to-digital Converter for All-Digital Phase-Locked Loop

Design of A Delay-Locked-Loop-Based Time-To-Digital Converter

A Fractional- N DTC-based ADPLL using path-select multi-delay line TDC and true fractional division technique

A low-power clock generator based on digital DLL for high speed pipelined ADCs

A Fast-Locking Digital DLL with a High Resolution Time-to-digital Converter

A PVT tolerant 10 to 500 MHz all-digital phase-locked loop with coupled TDC and DCO

A 0.0055 Mm(2) 480 Mu W Fully Synthesizable Pll Using Stochastic Tdc In 28 Nm Fdsoi

A shared TDC-based fast-lock all-digital DLL using a DCC-embedded delay line

A Programmable Dco-Based Digital Clock Multiplier and Divider

A Resolution-Tunable Low Power Time-to-Digital Converter With an Improved ADDLL Based on a Cyclic Pulse Ring Oscillator

A Dll Based Low-Phase-Noise Clock Multiplier with Offset-Tolerant Pfd

An Overview of Digital-Intensive ΔΣ Phase-Locked Loops Utilizing 1-Bit Conversion and Modulation.

A 360μw Vernier Time-to-Digital Converter for ADPLL in IoT Applications

An evenly-spaced-phase all-digital DLL using dual-loop SAR control

A 0.0055mm2 480µw Fully Synthesizable PLL Using Stochastic TDC in 28nm FDSOI