Abstract:This article presents a resolution-tunable time-to-digital converter (TDC) with a three-level structure, in which the low-level TDC employs an improved all-digital delay-locked loop (ADDLL) based on a cyclic pulse ring oscillator (CPRO) and a digital controller for detection lock state (DLS). Specifically, a bidirectional bypass transmission delay unit (BBTDU) in CPRO provides adjustable resolution with a 15 ps coarse delay step and a 3.5 ps fine delay step. Second, a data processing approach is presented to open the window to extract a 4-bit binary data of the bidirectional serial shift register line (BSSRL) in ADDLL for DLS and update the values of BSSRL at the same position of windowing, which can reduce the number of manipulated registers in BSSRL by approximately 93.7%. Then, a methodology of detecting the locking pattern between lock and unlock and selecting the fixed optimal windowing sequence to update the controlling values of BSSRL is proposed to eliminate dithering in a locked state, which can reduce the clock phase jitter when locked. Finally, the proposed TDC has been integrated into a system-on-chip (SoC) and fabricated in 65-nm CMOS technology. The measurement results implemented with a 30 MHz reference clock demonstrate that a resolution-tunable TDC with low power has been obtained. There are six configurable resolutions in all. When configured to a minimum resolution of 7.78 ps, the power consumption and the precision are 4.812 mW and 3.02 ps, respectively. While configured for a maximum resolution of 29.7 ps, the power consumption and the precision are 2.874 mW and 13.2 ps, respectively. The proposed TDC is extremely flexible and well-suited for integration into other large-scale application-specific integrated circuit (ASIC) chips to extend the application range, especially for low-frequency applications.

A Low Power Time-to-digital Converter for All-Digital Phase-Locked Loop

A 360μw Vernier Time-to-Digital Converter for ADPLL in IoT Applications

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

Design and Analysis of a Robust All-Digital Clock Generation System with a DLL-based TDC

A Resolution-Tunable Low Power Time-to-Digital Converter With an Improved ADDLL Based on a Cyclic Pulse Ring Oscillator

A Sub-mW Fractional-<inline-formula> &Lt;tex-Math Notation="latex">${n}$ &Lt;/tex-Math> &Lt;/inline-Formula> ADPLL with FOM of −246 Db for IoT Applications

A Low Power Tdc With 0.5ps Resolution For Adpll In 40nm Cmos

A 8bits, 6.2ps Resolution Two-Step Time-to-digital Converter with Set-Reset-based Arbiters and Signal Tracking Mechanism

A 2.5ghz Adpll With Pvt-Insensitive Delta Sigma Dithered Time-To-Digital Conversion By Utilizing An Addll

A 2.5GHz ADPLL with PVT-insensitive ΔΣ dithered time-to-digital conversion by utilizing an ADDLL.

A Fractional- N DTC-based ADPLL using path-select multi-delay line TDC and true fractional division technique

A PVT-insensitive Self-Dithered TDC Design by Utilizing a ΔΣ DLL

An 11-Bit and 39 Ps Resolution Time-To-Digital Converter for Adpll in Digital Television

All‐digital PLL with ΔΣ DLL Embedded TDC

A 0.001-Mm$$^{2}$$ 112.32-$$\Upmu $$W All-Digital PLL with Dual-Tuned DCO and Dual-Tuned Control Algorithm

A High-Resolution, High-Linearity, Two-Step Time-to-Digital Converter for Wideband Counter-Assisted ADPLL in 0.13um CMOS

A Low-Power and Small Chip-Area Fractional-N Digital PLL with Combination of DPI and TDC

An All‐digital Phase‐locked‐loop with a Robustness Enhanced Dual‐mode DCO

A low-power coarse-fine time-to-digital converter in 65nm CMOS

A high precision TDC based on a multi-phase clock

A 0.0055 Mm(2) 480 Mu W Fully Synthesizable Pll Using Stochastic Tdc In 28 Nm Fdsoi