Abstract:Ceramic matrix composites have been identified as a potential material of core structure for the fourth generation of fission nuclear reactors. Regarding their excellent mechanical behavior in very harsh conditions (high temperature and high irradiation flux), the CVI–SiCf/SiC composites with pyrocarbon interlayer are of prime interest for the fuel cladding in the gas-cooled fast reactor. Although the working atmosphere is helium in these advanced reactors, the presence of oxidizing impurities could have a significant role on the mechanical behavior of materials subjected to long-term exposures. Within this framework, this study was intended to investigate the influence of oxidation on the SiCf/SiC composites mechanical properties. Different pre-damage states were intentionally introduced by mechanical tensile tests on plate specimens before performing an oxidation treatment of 1,000 h at 1,000 °C under helium with 10 ppm of O2. The degradation of the composite was determined from the mechanical behavior of post-exposure specimens. Results were correlated both with microstructural observations of the damage and with characterizations of the generated oxides at the surface of the composites. The most severe decline of mechanical properties occurs for the higher predamaged loadings. Indeed in this case, the silica formed during the oxidation of SiC is not in sufficient quantities to fill the cracks.

The Degradation Behavior of C/Sic Composites in Complex Environment

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

Erosion Behavior of C/SiC Composites in Atomic Oxygen

Oxidation Behavior of SiC/SiC Composites in Air at High Temperature

Oxidation behaviors of carbon fiber reinforced multilayer SiC-Si3N4 matrix composites

Preparation, microstructure, stability in magnesium metallurgy environment of SiC composites

Temperature-dependent oxidation kinetics and mechanical properties degradation of Cf/ZrB2-SiC composites

Influence of an O2 Type Oxidizing Environment on SiCf/SiC Composites: Properties/Microstructure Relationship

Non-Destruction Evaluation Method for Long-Term Oxidation Behavior of SiC/SiC Composites with Different Preforms in Wet Oxygen

A Progressive Oxidative Damage Model of C/SiC Composites under Stressed Oxidation Environments

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

High-Temperature Fatigue Degradation Behaviors of a 3D Braided C/SiC with a Thin Interlayer in Different Dry Oxygen Atmospheres

Influence of Oxidation Damages on Mechanical Properties of SiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers

Mechanical properties and microstructure evolution of KD‐SA SiCf/BN/SiC CMCs oxidized at different temperatures

Comparison of Oxidation Behaviors of 3D C/PyC/SiC and SiC/PyC/SiC Composites in an O2-Ar Atmosphere

Stress‐Oxidation Behavior of a Carbon/Silicon Carbide Composite in a High‐Temperature Combustion Environment

Effect of oxidation on internal friction behavior of C/SiC composites

Microstructural evolution and oxide layer structure of Csf/SiBCN composites during oxidation at 1500 °C

Internal Friction Behavior Of C/Sic Composites With Environmental Barrier Coatings In Corrosive Environment

Wet oxidation behavior of C/SiC–SiHf(B)CN composites at high temperature

Oxidation Behavior of SiCf/SiC Composites Modified by Layered-Y2Si2O7 in Wet Oxygen Environment