Abstract:This work presents two methods to improve the understanding of the mechanical behavior of nanocrystalline thin films. Firstly, a simple two-phase model is proposed to explain the inverse Hall–Petch effect. The model suggests that the nanocrystalline material consists of the grain-boundary and the grain interior with different mechanical properties. Secondly, a computational method is developed to create more realistic grain boundaries in simulations of polycrystals. Traditionally created grain boundaries by Voronoi tessellation are too dense and do not accurately reflect the reality and the experimental results. The strength of the nanocrystalline aluminum thin film is simulated using molecular dynamics. The grain size dependence of the elastic modulus, ultimate tensile stress, and engineering yield strength is demonstrated. The experimental values of modulus and strength are approximately 6 times smaller probably due to the presence of porosity in the real sample. An approach is developed to introduce porosity in the simulated samples at the grain boundaries and in the grain interior to reduce this discrepancy. The modeled value of modulus for a grain size of 40 nm without porosity is 67 GPa, whereas, with 50% grain-boundary porosity and 20% intra-granular porosity it is 30 GPa. For the ultimate tensile strength, we get 3 GPa and 1.4 GPa for samples without porosity and with porosity, respectively. The simulated values of modulus with porosity are still 4 times higher and the values of strength are about 2 times higher than the experimental ones. The amount of porosity in our method can be adjusted to fit the experimental values; however, high values of porosity cause the mechanical instability of the simulated samples.

Inverse Hall-Petch Effect of Hardness in Nanocrystalline Ta Films

Indentation size effects on the creep behavior of nanocrystalline tetragonal Ta films

Nanoindentation creep behaviors of amorphous, tetragonal, and bcc Ta films

The Rate Sensitivity and Plastic Deformation of Nanocrystalline Tantalum Films at Nanoscale

Unraveling the Hall-Petch to Inverse Hall-Petch Transition in Nanocrystalline CdTe

Size dependent mechanical properties of nanocrystalline Cu films

Indentation Size Dependent Plastic Deformation of Nanocrystalline and Ultrafine Grain Cu Films at Nanoscale

An Inverse Hall-Petch Behavior and Improving Toughness in Translucent Nanocrystalline High-entropy Zirconate Ceramic

Grain size dependence of hardness in nanocrystalline silicon carbide

Nanohardness of nanocrystalline TiN thin films

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

Size dependent mechanical properties and deformation mechanisms in Ti and Zr films

Elastic Modulus and Hardness of Cu–Ta Amorphous Films

Delay of inverse Hall-Petch relationship of nanocrystalline Cu by modifying grain boundaries with coherent twins

Two-phase model for inverse Hall–Petch effect in nanocrystalline thin film: Atomistic simulation study

Reverse Hall-Petch effect in ultra nanocrystalline diamond

Effects of crystal orientation on the indentation creep of β-tin

Nanoindentation study on room-temperature creep behavior of Ir33Ni28Ta39 bulk metallic glass

Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni