Abstract:Ni-based single crystal line alloy is constituted with gamma phase and gamma' phase in the form of coherency. Since an indenter for two-phase coherent structure is bigger than the usual nano-scale indenter, the press location of indenter may be unclear in nanoindentation simulation. Both gamma phase and gamma' phase may be pressed initially, and the mechanical properties shown are different because of the initial press locations. The nanoindentation of Ni-based single crystal line alloys is simulated by molecular dynamics method. Two models are used to study about the hardness in [001] crystal orientation, one is the model gamma/gamma' with the initial indentation on gamma phase, and the other is the model gamma'/gamma with the initial indentation on gamma' phase. The influence of misfit dislocation at (001) interface on nanoindentation of the two models is analyzed using a center-symmetry parameter. Results show that the misfit dislocation shape of the two models are different after relaxation. Lomer-Cottrell dislocation occurs on (001) interface in the gamma'/gamma model. Before 0.930 nm press depth is reached, there is little change in the (001) interface misfit dislocation of the two models. Relationship between press load and press depth is similar for the two models, and it is the same in the relationship between hardness and press depth. After press depth reaches 0.930 nm, the misfit dislocation at (001) interface for model gamma'/gamma grows big, which results in a smaller press load and a smaller hardness computation in the model gamma'/gamma than that in model gamma/gamma'. When the press depth reach 2.055 nm, we find only a small amount of dislocations in gamma phase that can go into gamma' phase since the misfit dislocation at (001) interface in model gamma/gamma' hinders the process. However, none of dislocations can go into gamma phase because of the prevention caused by Lomer-Cottrell dislocation at the (001) interface in the model gamma'/gamma. That means the Lomer-Cottrell dislocation reinforces the material obviously. So the press load in model gamma'/gamma grows faster than that in model gamma/gamma'.

The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

Effect of Crystallographic Orientation on Nano-indentation Behavior of Nickel Based Single Crystal Super Alloys

Influnence of Indenter on the Nanoindentation of Ni Based Single Crystal Alloy

Indentation Creep Surface Morphology of Nickel-Based Single Crystal Superalloys

Orientation Behavior in TRC-ZA21 Magnesium Alloy with Fine Grain Size During Nano-Indentation Process

Effect of Crystallographic Orientation on Impression Creep Behaviors of Single Crystal Based on Crystal Plasticity Theory

Effects of crystal orientation on the indentation creep of β-tin

Orientation Effects on the Tensile Properties of Single Crystal Nickel with Nanovoid: Atomistic Simulation

Influence Of Initial Indentation Point On Nanoindentation Of Ni-Based Single Crystal Line Alloys

Probing the Impact of Grain Interior and Grain Boundaries on the Mechanical Behavior of a High-Mn Austenitic Steel

The Influence of Crystallographic Orientation and Grain Boundary on Nanoindentation Behavior of Inconel 718 Superalloy Based on Crystal Plasticity Theory

The synergistic effect of grain boundary and grain orientation on micro-mechanical properties of austenitic stainless steel

Effect of Grain Orientation on Indentation Induced Creep in Pure Zinc

Influence of Grain Orientation on Hardness Anisotropy and Dislocation Behavior of AlN Ceramic in Nanoindentation

Experimental and Simulation Analysis of Residual Topography Dominated Deformation Mechanism of Nanoindentation: a Case Study of Inconel 625 Superalloy

Effects of Crystalline Anisotropy and Indenter Size on Nanoindentation by Multiscale Simulation.

Effect of Strain Rate on Deformation Behavior of AlCoCrFeNi High-Entropy Alloy by Nanoindentation

Experimental Study and Crystal Plasticity Finite Element Simulations of Nano-Indentation-induced Lattice Rotation and the Underlying Mechanism in TC6 Single Α-Grain

Coupled Effect of Crystallographic Orientation and Indenter Geometry on Nanoindentation of Single Crystalline Copper

Experiments and Crystal Plasticity Finite Element Simulations of Nanoindentation on Ti–6Al–4V Alloy

Nanoindentation characterised plastic deformation of a Al0.5CoCrFeNi high entropy alloy