Abstract:A methodology for electrochemical preparation of nickel layers intended to be used as targets for charged particle accelerators is proposed. The goal is to deposit the majority of metal dissolved in the electrolytic bath during a reasonable time (no longer than several hours) providing an acceptable quality of the deposits in terms of purity, surface roughness, compact and crack-free structure and mechanical stability. The electrodeposition is carried out from novel aqueous baths prepared by dissolution of a metal powder in a HNO 3 -free solution due to the limited availability of isotopically enriched nickel concentration of the metal in the bath is low or moderate. This factor combined with the requirement of deposition of all dissolved metal makes serious differences between the target deposition and regular industrial plating. The impact of the electrolytic bath pH and the plating current density is analysed in order to optimise deposition parameters. The pH was varied from 3.8 to 5.3 while the applied current density ranged from 30 to 240 mA cm −2 . Progress in the deposition process was analysed using in situ UV–vis spectroscopy while a scanning electron microscope was applied to study the morphology of the deposits. Optimal electroplating conditions, which allow relatively fast deposition (up to ca. 7.2 h) of good quality metallic deposits containing most of the metal present in the bath (≥ 95%), are suggested.

Electrodeposition Conditions of Metallic Nickel in Electrolytic Membrane Reactor

Study of the electrodeposition conditions of metallic manganese in an electrolytic membrane reactor

Preparation of Pure Nickel Chloride Solution by Membrane Electrolysis Process

Electro-oxidation of Ni (II)-citrate complexes at BDD electrode and simultaneous recovery of metallic nickel by electrodeposition

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

Optimisation of parameters of complete nickel electrodeposition from acidic aqueous electrolytic baths prepared by dissolution of metal powder

Removal of Nickel from Spent Electroless Nickel-Plating Bath with Nickel Foam Cathode

Experimental study on the treatment of highly concentrated electroplating nickel-containing waste liquid by electrolytic method

Recovery of Precious Metal Material Ni from Nickel Containing Wastewater Using Electrolysis

Nickel electrowinning using a Pt catalysed hydrogen-diffusion anode. Part I: Effect of chloride and sulfate ions and a magnetic field

Insights into Electrodeposition Process of Nickel from Ammonium Chloride Media with Speciation Analysis and in Situ Synchrotron Radiation X-ray Imaging

Constant Current Electrodeposition Preparation of Nickel Layer and Its Mechanical Properties in Ionic Liquid

Nickel electrodeposition from deep eutectic solvents containing copper ions at a high temperature

Influence of Some Parameters on Membrane-Free Electrodeionization for the Purification of Wastewater Containing Nickel Ions

Recovery of Nickel by Electrolytic Method from Electroplating Wastewater

The Electroplated Nickel from Acidic Citrate Electrolytes

Recovery Nickel from Berkheya Coddii Biomass

Nickel (II) removal from real electroplating wastewater in an electrocoagulation reactor: parametric optimization by response surface methodology

Electrochemical reactor with rotating cylinder electrode for optimum electrochemical recovery of nickel from plating rinsing effluents

Electrodeposition of Ni from Choline Chloride/Ethylene Glycol Deep Eutectic Solvent and Pure Ethylene Glycol

Preparation of nanocrystalline electrocatalystic electrode for electrodeposition