Abstract:Polysiloxane with multiple acryloxyl groups at the terminal site of the polymer chain was synthesized by the condensation reaction between hydroxyl-terminated polysiloxane and acryloyl chloride and used to improve the cross-linking density of UV-curable silicone materials initiated from dual acryloxy-terminated symmetric polysiloxane or single acryloxy-terminated asymmetric polysiloxane with the mixture of Irgacure 1173 and Irgacure 184 at a mass ratio of 1:1 as the photoinitiator. The effects of factors such as initiator composition, UV irradiation time, structure, and molecular weight of linear dual acryloxy-terminated or single acryloxy-terminated asymmetric siloxane oligomers on the gelation yield, thermal properties, water absorption, and water contact angle of UV-cured film were investigated. The synthesized cross-linking density modifier can be copolymerized with acryloxy-functionalized linear polysiloxanes under the action of a photoinitiator to increase the cross-link density of UV-cured products effectively. Both linear dual acryloxy-terminated or single acryloxy-terminated asymmetric siloxane oligomers can be copolymerized with cross-link density modifiers within 20 s of UV irradiation. The gelation yields of the UV-cured products obtained from the dual acryloxy-terminated siloxane oligomers were greater than 85%, and their surface water contact angles increased from 72.8° to 95.9° as the molecular weight of the oligomers increased. The gelation yields of UV-cured products obtained from single acryloxy-terminated asymmetric siloxane oligomers were less than 80%, and their thermal stabilities were inferior to those obtained from the dual acryloxy-terminated siloxane oligomers. However, the water contact angles of UV-cured products obtained from these single acryloxy-terminated asymmetric siloxane oligomers were all greater than 90°.

Characterization and Properties of UV‐curable Polyurethane‐acrylate/silica Hybrid Materials Prepared by the Sol‐gel Process

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Synthesis and Properties of Nanosilica‐reinforced Polyurethane for Grouting

Interaction and Microstructure of Polyurethane/Silica Hybrid Films Prepared by Sol-Gel Process

Preparation of waterborne epoxy acrylate/silica sol hybrid materials and study of their UV curing behavior

Structure and Mechanical Properties of Polyurethane/Silica Hybrid Coatings

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

Mechanical Properties of Interface‐free Polyacrylate‐silica Hybrid Sol–gel Materials for Potential Dental Applications

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials

Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties

Preparation and Characterization of Trialkoxysilane‐Containing Acrylic Resin/Alumina Hybrid Materials

Preparation of hybrid polyurethane–silica composites by a lateral sol-gel process using tetraethyl orthosilicate

The Preparation of Acryloxyl Group Functionalized Siloxane Polymers and the Study of Their Ultra Violet Curing Properties

Synthesis of UV-Cured Silicone Resin/Silica Nanocomposites from UV-Curable Polysilisiquioxane and Methacrylate-Functionalized Silica

Structure and Properties of Polyurethane/nanosilica Composites

Trialkoxysilane‐capped Acrylic Resin/alumina Hybrid Materials Prepared by in Situ Sol–gel Process

Moisture-cured elastomeric transparent UV and X-ray shielding organic–inorganic hybrids

High Tensile Strength UV-Cured Castor Oil-Based Silicone-Modified Polyurethane Acrylates

PREPARATION OF ACRYLIC RESIN/TiO2 ORGANIC-INORGANIC HYBRID BY SOL-GEL PROCESS AND CHARACTERIZATION OF ITS STRUCTURE